Premium Information is available for this item - Upgrade for $1 a day
3040-01-443-7533
Shouldered Shaft
3040014437533 014437533 0527220012 90-3370-00 REF NO. 11 90-3370-00
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
1
Marketplace 3040-01-443-7533
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-443-7533 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-443-7533 RQST NE Updated Every Day 3040-01-443-7533 RQST
RQST NE Updated Every Day 3040-01-443-7533 RQST RQST NE Updated Every Day 3040-01-443-7533 RQST
/fsg-43/fsc-4320/us
NO. 5 90-3370-00 Managed by United States NSN Created on 23 Apr 1997 Data Last Changed May 2023 NATO
REF NO.2 0120820101 90-3370-00 A complete enclosure which protects the internal components of a PUMP
REF NO.1 90-3370-00 A complete enclosure which protects the internal components of a PUMP, (as modified
https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-443-7533 Shouldered Shaft 3040014437533 014437533
REF NO. 10 90-3370-00 A shaft having two or more different diameters (greater than 0.031 inches (
REF NO.15 90-3370-00 REF NO.15/B7943119 A tubular shaped item with or without flange(s) designed
for $1 a day Upgrade your Account Upgrade 5365-01-444-2757Sleeve Spacer5365014442757 014442757 90-3370-00
REF NO.2 0120820101 90-3370-00 A complete enclosure which protects the internal components of a PUMP
Restrictions 3040-01-443-7533
3040-01-443-7533 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-443-7533
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-443-7533
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
Approved Sources 3040-01-443-7533
- Part Number
- Manufacturer
- Status
- 0527220012
- Manufacturer
- 93232 - Curtiss-Wright Electro-Mechanical (Replaced)
- Original Design
- Original Design
- 90-3370-00 REF NO. 11
- 93232 - Curtiss-Wright Electro-Mechanical (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 0527220012
- 0UBG9 - Curtiss-Wright Electro-Mechanical (Active)
- Advisory Reference
- Advisory Reference
- 90-3370-00 REF NO. 11
- 0UBG9 - Curtiss-Wright Electro-Mechanical (Active)
- Advisory Reference
- Advisory Reference
- 90-3370-00
- 93232 - Curtiss-Wright Electro-Mechanical (Replaced)
- Informational Drawing
- Informational Drawing
DLA Procurement Analysis 3040-01-443-7533
Management Data 3040-01-443-7533
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3040-01-443-7533
Freight Information 3040-01-443-7533
3040-01-443-7533 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-443-7533 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-443-7533 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-443-7533 is not classified as a special type of cargo when transported by water. 3040-01-443-7533 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-443-7533
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- Vendor's Protective Grease or Oil Coating
- --
- No Requirement
- Not Applicable
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Contracting Technical Data File (CTDF) 3040-01-443-7533 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: