Premium Information is available for this item - Upgrade for $1 a day
3040-01-442-4611
Shouldered Shaft
3040014424611 014424611 RCSK14772C 30636-1 RCSK14772 30636
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
June 2023
3
Marketplace 3040-01-442-4611
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-442-4611 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-442-4611 RQST NE Updated Every Day 3040-01-442-4611 RQST
Updated Every Day 3040-01-442-4611 RQST NE Related Documents 3040-01-442-4611 5+ Documents ( More...
Shouldered Shaft 3040014424611 014424611 day Upgrade your Account Upgrade 3040-01-442-4611Shouldered
Shaft3040014424611 014424611 RCSK14772C 30636-1 Documents 3040-01-442-4611 5+ Documents ( More... https
Shouldered Shaft 3040014424611 https//www.nsnlookup.com /fsg-47/fsc-4730/us 4730-01-173-4605 Pipe
/us 5310-01-433-6284 Hexagon Plain Nut 5310014336284 014336284 8637 Part NumberManufacturerStatus0-30636
/www.nsnlookup.com /fsg-51/fsc-5120/dk 5120-22-609-6008 Wheel Puller 5120226096008 226096008,30636 30636
Last Wheel Puller 5120226096008 226096008,30636 Documents 5120-22-609-6008 3+ Documents ( More... ) 30636
day Upgrade your Account Upgrade 3040-01-442-4611Shouldered Shaft3040014424611 014424611 RCSK14772C
30636 enable JavaScript in your web browser . 5120-66-018 https//www.nsnlookup.com /fsg-47/fsc-4730/us
Restrictions 3040-01-442-4611
3040-01-442-4611 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-442-4611
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-442-4611
- US Army (A920)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- A181
- Supplementary Receivers:
- AZ
- US Navy (N9BC)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GG
Approved Sources 3040-01-442-4611
- Part Number
- Manufacturer
- Status
- RCSK14772C
- Manufacturer
- 34623 - Am General Llc (Active)
- Primary Buy
- Primary Buy
- 30636-1
- 60602 - Orscheln Products L.L.C. (Active)
- Secondary Buy
- Secondary Buy
- RCSK14772
- 34623 - Am General Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 30636
- 60602 - Orscheln Products L.L.C. (Active)
- Informational Drawing
- Informational Drawing
Weapon Systems (WSDC) 3040-01-442-4611
DLA Procurement Analysis 3040-01-442-4611
Management Data 3040-01-442-4611
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-442-4611
Freight Information 3040-01-442-4611
3040-01-442-4611 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-442-4611 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-442-4611 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-442-4611 is not classified as a special type of cargo when transported by water. 3040-01-442-4611 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-442-4611
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- --
- --
- --
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Contracting Technical Data File (CTDF) 3040-01-442-4611 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: