Premium Information is available for this item - Upgrade for $1 a day
3040-01-441-4737
Shouldered Shaft
3040014414737 014414737 123-4403545 PART 43 123-5941946 PART 43 123-4403540 PART 43L1 123-5901610 PART 43L1 123-5941945 PART 43L1 123-5941946 PART 43L1 123-4498410 PART43 123-4403545 PART 43L1
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
5
Marketplace 3040-01-441-4737
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-441-4737 2+ Documents (More...)
43L1 123-5941946 PART 43L1 123-4498410 PART43 123-4403545 PART 43L1 A shaft having two or more different
RQST NE Updated Every Day 3040-01-441-4737 RQST Updated Every Day 3040-01-441-4737 RQST NE Related Documents
Shouldered Shaft 3040014414737 014414737 Upgrade your Account Upgrade 3040-01-441-4737Shouldered
Shaft3040014414737 014414737 123-4403545 PART 43 123 -5941946 PART 43 123-4403540 PART 43L1 123-5901610
Restrictions 3040-01-441-4737
IUID Required
3040-01-441-4737 is a Shouldered Shaft that is specifically designed to be or selected as being nuclear hard. In addition it has other critical features such as tolerance, fit restrictions or application.This item has been confirmed as a Critical Munitions List Item or a Sensitive Commerce Control List Item and cannot be in the possession of any party anywhere in the World who is not an authorized NATO Government. Any other possessor of this item should mutilate it now as possession violates international and local laws. This item is a US Munitions List Item and must be mutilated to scrap. This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-441-4737
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-441-4737
- US Navy (N1H5)
- Effective Date:
- 1 Feb 1997
- Supplementary Collaborators:
- JB
- Supplementary Receivers:
- GG
Approved Sources 3040-01-441-4737
- Part Number
- Manufacturer
- Status
- 123-4403545 PART 43
- Manufacturer
- 43689 - Huntington Ingalls Inc (Active)
- Incomplete Reference
- Incomplete Reference
- 123-5941946 PART 43
- 43689 - Huntington Ingalls Inc (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 123-4403540 PART 43L1
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
- 123-5901610 PART 43L1
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
- 123-5941945 PART 43L1
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
- 123-5941946 PART 43L1
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
- 123-4498410 PART43
- 43689 - Huntington Ingalls Inc (Active)
- Secondary Buy
- Secondary Buy
- 123-4403545 PART 43L1
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
Datasheet 3040-01-441-4737
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Item Identification [AGAV]
- Hatch,30Dia Cover And Fairing Fwd Escape Trunk Upper
- Criticality Code Justification [CRTL]
- Zzzy
- Reference Number Differentiating Characteristics [ZZZY]
- Quality Control Iaw Navships 0948-045-7010 Material Identification And Control Instruction For Level 1 Items
Management Data 3040-01-441-4737
Navy
- Cognizance:
- 1H
- Consumable material assigned to NAVICP MECH for inventory management
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- L1
- An item that supports either a SUBSAFE or Level 1 system that has undergone the extreme material control and quality assurance techniques that provide objective evidence of its acceptance for its appropriate application. Each item has certification papers (or special markings that provide traceability to the certification) that pedigree its material and physical properties, provide traceability, to manufacturer, contract list and lot, and document the quality assurance system and test requirements applied to the item.
- Issue, Repair, Requisition Restriction Code:
- 00
- No Restriction
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
Similar Supply Items to 3040-01-441-4737
Freight Information 3040-01-441-4737
3040-01-441-4737 has freight characteristics managed by the Food and Drug Administration (FDA).It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of A. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS S. 3040-01-441-4737 is rated as class 85 when transported by Less-Than Truckload (LTL) freight. 3040-01-441-4737 is rated as class 85 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-441-4737 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-441-4737 is not classified as a special type of cargo when transported by water. 3040-01-441-4737 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-441-4737
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
- Storage Environment
- Unheated General Purpose
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- MIL-P-130, Laminated and Creped Wrapping Paper
- Wood Blocking and Bracing, Fasteners, or Steel Strapping, for Tie-down purposes. Rubber tired wheels shall be blocked clear of the floor of the crate or skid and shall not be load bearing
- Not Applicable
- ASTM-D6880, Class 2, Heavy Duty Wood Box
- Open for inspection or use only
- MIL-P-130, Laminated and Creped Wrapping Paper
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement