Premium Information is available for this item - Upgrade for $1 a day
3040-01-436-3256
Shouldered Shaft
3040014363256 014363256 D408428-M M900881 408428
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
3
Marketplace 3040-01-436-3256
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-436-3256 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-436-3256 RQST NE Updated Every Day 3040-01-436-3256 RQST
Updated Every Day 3040-01-436-3256 RQST NE Related Documents 3040-01-436-3256 5+ Documents ( More...
Shouldered Shaft 3040014361640014361640 D408428-M M900881 408428 day Upgrade your Account Upgrade 5325
-01-441-5550Retaining Ring5325014415550 014415550 D408428-8 408428 https//www.nsnlookup.com /fsg https
/fsg-53/fsc-5325/us
Shouldered Shaft 3040014363256 014363256 RQST NE Updated Every Day 3040-01-436-3256 RQST https/
/www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-436-1640 Shouldered Shaft 3040014361640 014361640 D408428-M
//www.nsnlookup.com /fsg-53/fsc-5360/us 5360-00-469-0112 Compression Helical Spring 5360004690112 408428
22101 A hand controlled device maneuvered by a https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-436-3256
476-2052 Ring Spacer 5365004762052 004762052,021 https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-436-3256
Shouldered Shaft 3040014363256 014363256 www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-436-3256
Restrictions 3040-01-436-3256
3040-01-436-3256 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-436-3256
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-436-3256
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
Approved Sources 3040-01-436-3256
- Part Number
- Manufacturer
- Status
- D408428-M
- Manufacturer
- 63504 - Palfinger Marine Usa, Llc (Active)
- Primary Buy
- Primary Buy
- M900881
- 63504 - Palfinger Marine Usa, Llc (Active)
- Secondary Buy
- Secondary Buy
- M900881
- 99300 - Harding-Watercraft Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- D408428-M
- 99300 - Harding-Watercraft Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 408428
- 99300 - Harding-Watercraft Inc (Replaced)
- Informational Drawing
- Informational Drawing
DLA Procurement Analysis 3040-01-436-3256
Management Data 3040-01-436-3256
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-436-3256
Freight Information 3040-01-436-3256
3040-01-436-3256 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-436-3256 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-436-3256 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-436-3256 is not classified as a special type of cargo when transported by water. 3040-01-436-3256 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-436-3256
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Preservative Coating Only
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- Vendor's Protective Grease or Oil Coating
- MIL-PRF-121, Greaseproof, Waterproof Barrier
- --
- --
- Any Suitable Fiber Box
- No special marking
- MIL-PRF-121, Greaseproof, Waterproof Barrier
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Contracting Technical Data File (CTDF) 3040-01-436-3256 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: