Premium Information is available for this item - Upgrade for $1 a day
3040-01-435-6231
Shouldered Shaft
3040014356231 014356231 6111405-B3 581-6405752 FIND AHNA-B3 581-6405752-B3 6405752
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
1
Marketplace 3040-01-435-6231
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-435-6231 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-435-6231 RQST NE Updated Every Day 3040-01-435-6231 RQST
FIND AHNA-B3581-6405752-B36405752 A shaft having Restrictions 3040-01-435-6231 DEMIL: A | DEMILI : |
FIND AHNA-ASSY-B 218016794 6405752 FIND AHNA-ASSY-B 53711 - Naval Sea Systems https//www.nsnlookup.com
Shouldered Shaft 3040014356231 014356231 Documents 3040-01-435-6231 5+ Documents ( More... https
Shouldered Shaft 3040014356231 014356231 Documents 3040-01-435-6231 5+ Documents ( More... https
FIND NO AHNA-B17 218004920 6405752 FIND NO AHNA-B17 53711 - Naval Sea Systems https//www.nsnlookup.com
6111405-B3 581-6405752 FIND AHNA-B3 581-6405752-B3 6405752 A shaft having two or more different diameters
(greater than 0.031 https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-435-6231 Shouldered Shaft 3040014356231
Shouldered Shaft 3040014356231 014356231 Upgrade your Account Upgrade 3040-01-435-6231Shouldered
Shaft3040014356231 014356231 6111405-B3 581-6405752 FIND AHNA-B3 581-6405752-B3 6405752 A shaft having
Restrictions 3040-01-435-6231
3040-01-435-6231 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-435-6231
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-435-6231
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HDJB
Approved Sources 3040-01-435-6231
- Part Number
- Manufacturer
- Status
- 6111405-B3
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Primary Buy
- Primary Buy
- 581-6405752 FIND AHNA-B3
- 53711 - Naval Sea Systems Command (Active)
- Secondary Buy
- Secondary Buy
- 581-6405752-B3
- 53711 - Naval Sea Systems Command (Active)
- Secondary Buy
- Secondary Buy
- 6405752
- 53711 - Naval Sea Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-435-6231
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Steel Comp 304
- Surface Finish [CSYM]
- 32.0 Microinches
- First End Style [AAGZ]
- Plain
- First End Diameter [AMDL]
- 1.2500 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- Slotted
- Second End Diameter [AMFZ]
- 0.2495 Inches Nominal
- Second End Slot Depth [AMGR]
- 0.187 Inches Nominal
- Second End Slot Width [AKTN]
- 0.094 Inches Nominal
- Largest Step Diameter [CSPY]
- 1.250 Inches Nominal
- Overall Length [ABHP]
- 3.880 Inches Nominal
- Step Quantity [ATPC]
- 4
- End Item Identification [AGAV]
- W/S Seawolf Class Ssn
DLA Procurement Analysis 3040-01-435-6231
Management Data 3040-01-435-6231
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-435-6231
Freight Information 3040-01-435-6231
3040-01-435-6231 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-435-6231 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-435-6231 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-435-6231 is not classified as a special type of cargo when transported by water. 3040-01-435-6231 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-435-6231
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Contracting Technical Data File (CTDF) 3040-01-435-6231 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- J
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: