Premium Information is available for this item - Upgrade for $1 a day
3040-01-434-5466
Shouldered Shaft
3040014345466 014345466 167-6404604 FIND 52 167-6404604-52 DF1502-255-52 6404604
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
1
Marketplace 3040-01-434-5466
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-434-5466 5+ Documents (More...)
or more different diameters (greater FIND 29 167-6404604 -52DF1502-255 /fsg-30/fsc-3040/us 3040-01-434
-5466 Shouldered Shaft 3040014345466014345466 FIND 52 167-6404604-52 https//www.nsnlookup.com /fsg-31
/fsg-30/fsc-3040/us 3040-01-434-5466 Shouldered Shaft 3040014345466 014345466 for $1 a day Upgrade your
Account Upgrade 3040-01-434-5466Shouldered Shaft3040014345466 014345466 167-6404604 FIND 52 167-6404604
-29 6404604-53 DF1502 -29 6404604-53 DF1502 -255-53 6404604 A shaft having two or more different diameters
having two or more different diameters (greater FIND 29 167-6404604 -52 DF1502-255 -78 DF1502-255-786404604
/fsg-31/fsc-3120/us
https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-434-5466 Shouldered Shaft 3040014345466 014345466
-29 6404604-53 DF1502 -255-53 6404604 A shaft having two or more different diameters https//www.nsnlookup.com
/fsg-31/fsc-3120/us
FIND 71167-6404604-71 A tubular shaped unthreaded item with or without a flange at one BUY NE FedMall
FIND 71 167-6404604-71 A tubular shaped unthreaded item https//www.nsnlookup.com /fsg-30/fsc-3040/us
Restrictions 3040-01-434-5466
3040-01-434-5466 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-434-5466
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-434-5466
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HDJB
Approved Sources 3040-01-434-5466
- Part Number
- Manufacturer
- Status
- 167-6404604 FIND 52
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Primary Buy
- Primary Buy
- 167-6404604-52
- 53711 - Naval Sea Systems Command (Active)
- Secondary Buy
- Secondary Buy
- DF1502-255-52
- 43689 - Huntington Ingalls Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 6404604
- 53711 - Naval Sea Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-434-5466
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Item Identification [AGAV]
- W/S Seawolf Class Ssn
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 1.0000 Inches Nominal
- First End Step Length [CSQZ]
- 0.200 Inches Minimum And 0.220 Inches Maximum
- First End Style [AAGZ]
- Hexagonal
- First End Width Across Flats [ACKY]
- 0.427 Inches Minimum And 0.437 Inches Maximum
- Material [MATT]
- Copper Alloy
- Largest Step Diameter [CSPY]
- 1.247 Inches Minimum And 1.248 Inches Maximum
- Second End Distance From End To Groove [AMFQ]
- 1.1200 Inches Nominal
- Second End External Thread Length [AMHA]
- 1.0000 Inches Nominal
- Second End Diameter [AMFZ]
- 1.0000 Inches Nominal
- Second End Style [AAHP]
- Circular Grooved And Externally Threaded
- Second End Groove Diameter [AAHX]
- 0.8000 Inches Nominal
- Second End Groove Width [AAHW]
- 0.3800 Inches Nominal
- Special Features [FEAT]
- 2-0.1450-.1555 In. Holes Located On First End Across Flats Equally Spaced .670 In. Deep
- Overall Length [ABHP]
- 5.010 Inches Nominal
- Step Quantity [ATPC]
- 3
- Surface Finish [CSYM]
- 32.0 Microinches
Weapon Systems (WSDC) 3040-01-434-5466
DLA Procurement Analysis 3040-01-434-5466
Management Data 3040-01-434-5466
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-434-5466
Freight Information 3040-01-434-5466
3040-01-434-5466 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-434-5466 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-434-5466 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-434-5466 is not classified as a special type of cargo when transported by water. 3040-01-434-5466 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-434-5466
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- Vendor's Setup or Folding Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Contracting Technical Data File (CTDF) 3040-01-434-5466 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: