Premium Information is available for this item - Upgrade for $1 a day
3040-01-429-9912
Shouldered Shaft
3040014299912 014299912 6894423 6894456 6894423 ITEM 4
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
1
Marketplace 3040-01-429-9912
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-429-9912 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-429-9912 RQST NE Updated Every Day 3040-01-429-9912 RQST
RQST NE Updated Every Day 3040-01-429-9912 RQST Updated Every Day 3040-01-429-9912 RQST NE Related
0142991946894423 6894428 A toothed wheel whose teeth or sprockets are designed to be engaged with 6894456
6894423 ITEM Shouldered Shaft 3040014654462014654462 Upgrade your Account https//www.nsnlookup.com /
- Upgrade for $1 a day Upgrade your Account Upgrade 5365-01-465 -9047Shim5365014659047 014659047 6894423
3120014301833 014301833 Sprocket Wheel 3020014655240014655240 -01-465-9047Shim5365014659047 014659047 6894423
/fsg-30/fsc-3020/us
- Upgrade for $1 a day Upgrade your Account Upgrade 5365-01-465 -9047Shim5365014659047 014659047 6894423
for $1 a day Upgrade your Account Upgrade 3120-01 -430-1833Sleeve Bushing3120014301833 014301833 6894423
for $1 a day Upgrade your Account Upgrade 3120-01 -430-1833Sleeve Bushing3120014301833 014301833 6894423
for $1 a day Upgrade your Account Upgrade 3950-01-429-9194Winch Parts Kit3950014299194 014299194 6894423
Restrictions 3040-01-429-9912
3040-01-429-9912 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-429-9912
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-429-9912
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
Approved Sources 3040-01-429-9912
- Part Number
- Manufacturer
- Status
- 6894456
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Primary Buy
- Primary Buy
- 6894423
- 53711 - Naval Sea Systems Command (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 6894423 ITEM 4
- 53711 - Naval Sea Systems Command (Active)
- Secondary Buy
- Secondary Buy
Datasheet 3040-01-429-9912
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Steel Comp 4140
- Material Document And Classification [MDCL]
- Mil-S-16974,4140 Mil Spec Single Material Response Or
- Material Document And Classification [MDCL]
- Aisi/Sae 4140 Assn Std Single Material Response Or
- Material Document And Classification [MDCL]
- Astm A304,Gr 4140H Assn Std Single Material Response
- Surface Finish [CSYM]
- 32.0 Microinches
- First End Style [AAGZ]
- Internal Threaded
- First End Diameter [AMDL]
- 3.8715 Inches Minimum And
- First End Diameter [AMDL]
- 3.8720 Inches Maximum
- First End Internal Thread Length [AMER]
- 0.500 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- Circular Grooved And Internally Threaded
- Second End Groove Width [AAHW]
- 0.0860 Inches Minimum And
- Second End Groove Width [AAHW]
- 0.0910 Inches Maximum
- Second End Groove Diameter [AAHX]
- 2.2481 Inches Nominal
- Second End Distance From End To Groove [AMFQ]
- 0.394 Inches Nominal
- Second End Diameter [AMFZ]
- 2.6239 Inches Minimum And
- Second End Diameter [AMFZ]
- 2.6247 Inches Maximum
- Second End Internal Thread Length [AMHP]
- 1.000 Inches Nominal
- Largest Step Diameter [CSPY]
- 6.500 Inches Nominal
- Overall Length [ABHP]
- 6.000 Inches Nominal
- Step Quantity [ATPC]
- 5
- Special Features [FEAT]
- Four 3/4-10 Unc-2B Holes On 5.250 In.Dbc; Second End Cbore 0.750 In.Dia 0.500 In.Deep; 7/32 In. Thru Hole In Relief Passage; 3/8-16 Unc-3B First End,1/8-27 Npt Second End
- End Item Identification [AGAV]
- Stream (Std. Tensioned Replenishment At Sea Method)
DLA Procurement Analysis 3040-01-429-9912
Management Data 3040-01-429-9912
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-429-9912
Freight Information 3040-01-429-9912
3040-01-429-9912 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-429-9912 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-429-9912 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-429-9912 is not classified as a special type of cargo when transported by water. 3040-01-429-9912 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-429-9912
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 8.0" H x -- W x -- L
- --
- --
- --
- Any Suitable Process
- 8.0" H x -- W x -- L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- Any Suitable Fiber Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 3040-01-429-9912 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: