Premium Information is available for this item - Upgrade for $1 a day
3040-01-429-5662
Straight Shaft
3040014295662 014295662 211069210 595-6401267 ITEM 41 211069210L1 595-6401267 ITEM 41L1
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE. View more Straight Shaft
May 2023
4
Marketplace 3040-01-429-5662
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-429-5662 5+ Documents (More...)
/fsg-30/fsc-3040/us
RQST NE Updated Every Day 3040-01-429-5662 RQST Updated Every Day 3040-01-429-5662 RQST NE Related Documents
3040-01-429-5662 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-429-5662
Straight Shaft 3040014295662 014295662 for $1 a day Upgrade your Account Upgrade 3040-01-429-5662Straight
Shaft3040014295662 014295662 211069210 vendors Request Updated Every Day 3040-01-429-5662 https//www.nsnlookup.com
Straight Shaft 3040014295662 014295662 day Upgrade your Account Upgrade 3040-01-429-5662Straight
Shaft3040014295662 014295662 211069210 595-6401267 ITEM 41 211069210L1 595-6401267 ITEM 41L1 A straight
Straight Shaft 3040014295662 014295662 day Upgrade your Account Upgrade 3040-01-429-5662Straight
Shaft3040014295662 014295662 211069210 595-6401267 ITEM 41 211069210L1 595-6401267 ITEM 41L1 A straight
Straight Shaft 3040014295662 014295662 day Upgrade your Account Upgrade 3040-01-429-5662Straight
Shaft3040014295662 014295662 211069210 595-6401267 ITEM 41 211069210L1 595-6401267 ITEM 41L1 A straight
Restrictions 3040-01-429-5662
IUID Required
3040-01-429-5662 is a Straight Shaft that is specifically designed to be or selected as being nuclear hard. In addition it has other critical features such as tolerance, fit restrictions or application.Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-429-5662
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-429-5662
- US Navy (N1H5)
- Effective Date:
- 1 Apr 1996
- Supplementary Collaborators:
- JB
- Supplementary Receivers:
- GG
Approved Sources 3040-01-429-5662
- Part Number
- Manufacturer
- Status
- 211069210
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Incomplete Reference
- Incomplete Reference
- 595-6401267 ITEM 41
- 53711 - Naval Sea Systems Command (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 211069210L1
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
- 595-6401267 ITEM 41L1
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
Datasheet 3040-01-429-5662
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Item Identification [AGAV]
- Barrel Assembly
- Criticality Code Justification [CRTL]
- Zzzy
- Reference Number Differentiating Characteristics [ZZZY]
- Quality Control Iaw Navships 0948-045-7010 Material Identification And Control Instruction For Level 1 Items
Management Data 3040-01-429-5662
Navy
- Cognizance:
- 1H
- Consumable material assigned to NAVICP MECH for inventory management
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- L1
- An item that supports either a SUBSAFE or Level 1 system that has undergone the extreme material control and quality assurance techniques that provide objective evidence of its acceptance for its appropriate application. Each item has certification papers (or special markings that provide traceability to the certification) that pedigree its material and physical properties, provide traceability, to manufacturer, contract list and lot, and document the quality assurance system and test requirements applied to the item.
- Issue, Repair, Requisition Restriction Code:
- 00
- No Restriction
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
Similar Supply Items to 3040-01-429-5662
Freight Information 3040-01-429-5662
3040-01-429-5662 has freight characteristics managed by the Food and Drug Administration (FDA).It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of A. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS S. 3040-01-429-5662 is rated as class 85 when transported by Less-Than Truckload (LTL) freight. 3040-01-429-5662 is rated as class 85 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-429-5662 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-429-5662 is not classified as a special type of cargo when transported by water. 3040-01-429-5662 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-429-5662
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
- Storage Environment
- Unheated General Purpose
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- PPP-C-795, Cellular Plastic Film Cushioning; or A-A-3129, Open Cell Plastic Cushioning; or PPP-C-1797, Polypropylene Foam Cushioning; or A-A-59136, Polyethylene Foam Cushioning
- --
- ASTM-D5118, Type CF, Class Domestic, Corrugated Fiberboard Box
- Open for inspection or use only
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement