Premium Information is available for this item - Upgrade for $1 a day
3040-01-424-7551
Shouldered Shaft
3040014247551 014247551 283470-0002 ITEM 14 177452-0031 283470-0002 ITEM-14CP 177452-0031CP
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
3
Marketplace 3040-01-424-7551
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-424-7551 4+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-424-7551 RQST NE Updated Every Day 3040-01-424-7551 RQST
Updated Every Day 3040-01-424-7551 RQST NE Related Documents 3040-01-424-7551 4+ Documents ( More...
Shouldered Shaft 3040014247551 014247551 your Account Upgrade 3040-01-424-7551Shouldered Shaft3040014247551
014247551 283470-0002 ITEM 14 177452 -0031 283470-0002 ITEM-14CP 177452-0031CP A shaft having two or
Shouldered Shaft 3040014247551 014247551 your Account Upgrade 3040-01-424-7551Shouldered Shaft3040014247551
014247551 283470-0002 ITEM 14 177452 -0031 283470-0002 ITEM-14CP 177452-0031CP A shaft having two or
Shouldered Shaft 3040014247551 014247551 your Account Upgrade 3040-01-424-7551Shouldered Shaft3040014247551
014247551 283470-0002 ITEM 14 177452 -0031 283470-0002 ITEM-14CP 177452-0031CP A shaft having two or
Restrictions 3040-01-424-7551
3040-01-424-7551 is a Shouldered Shaft that is specifically designed to be or selected as being nuclear hard. In addition it has other critical features such as tolerance, fit restrictions or application.This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-424-7551
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-424-7551
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HDJB
Approved Sources 3040-01-424-7551
- Part Number
- Manufacturer
- Status
- 283470-0002 ITEM 14
- Manufacturer
- 99657 - Marotta Controls Inc (Active)
- Incomplete Reference
- Incomplete Reference
- 177452-0031
- 99657 - Marotta Controls Inc (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 283470-0002 ITEM-14CP
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
- 177452-0031CP
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
Datasheet 3040-01-424-7551
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Criticality Code Justification [CRTL]
- Zzzy
- Reference Number Differentiating Characteristics [ZZZY]
- Cleaning, Packaging, And Marking Iaw Mil-Std-1330D
DLA Procurement Analysis 3040-01-424-7551
Management Data 3040-01-424-7551
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- CP
- An item that requires special cleaning and packaging for oxygen/nitrogen service (eg, valves, piping systems, generators).
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
Similar Supply Items to 3040-01-424-7551
Freight Information 3040-01-424-7551
3040-01-424-7551 has freight characteristics managed by the Food and Drug Administration (FDA).It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-424-7551 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-424-7551 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-424-7551 is not classified as a special type of cargo when transported by water. 3040-01-424-7551 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-01-424-7551 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: