Premium Information is available for this item - Upgrade for $1 a day
3040-01-420-1165
Shouldered Shaft
3040014201165 014201165 566-6404314-10 DF-2018-62 FN 10 6404314
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
November 2023
1
Marketplace 3040-01-420-1165
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-420-1165 5+ Documents (More...)
FedMall Updated Every Day 3040-01-420-1165 RQST NE Updated Every Day 3040-01-420-1165 RQST Updated Every
/fsg-30/fsc-3040/us 3040-01-420-1165 Shouldered Shaft 3040014201165014201165 566-6404314-10DF-2018-62
Shouldered Shaft 3040014201165 014201165 3040014201165014201165 566-6404314-10DF-2018-62 https/
a day Upgrade your Account Upgrade 9320-01-419-9946Solid Rubber Sheet9320014199946 014199946 566-6404314
a day Upgrade your Account Upgrade 9320-01-419-9946Solid Rubber Sheet9320014199946 014199946 566-6404314
www.nsnlookup.com /fsg-59/fsc-5945/us 5945-01-431-3707 Electrical Relay Retainer 5945014313707 566-6404314
/fsg-30/fsc-3040/us 3040-01-420-1042 Rigid Connecting Link 3040014201042 014201042 Details... 566-6404314
-13DF2018-62-136404314 A device for connecting the ends of two shafts -6404314-13DF2018-62-136404314
-14 566-6404314 A tubular shaped item with or without flange(s) designed to reduce friction and carry
Restrictions 3040-01-420-1165
3040-01-420-1165 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-420-1165
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-420-1165
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HDJB
Approved Sources 3040-01-420-1165
- Part Number
- Manufacturer
- Status
- 566-6404314-10
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Primary Buy
- Primary Buy
- DF-2018-62 FN 10
- 43689 - Huntington Ingalls Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 6404314
- 53711 - Naval Sea Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-420-1165
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Item Identification [AGAV]
- Seawolf Class(Ssn)
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.6230 Inches Minimum And 0.6240 Inches Maximum
- First End Style [AAGZ]
- Plain
- Material [MATT]
- Steel Comp 4140
- Largest Step Diameter [CSPY]
- 1.0000 Inches Nominal
- Material Document And Classification [MDCL]
- A193 Gr B7 Assn Std Single Material Response
- Second End Distance From End To Groove [AMFQ]
- 0.1850 Inches Nominal
- Second End Groove Diameter [AAHX]
- 0.2285 Inches Minimum And 0.2315 Inches Maximum
- Second End Diameter [AMFZ]
- 0.2470 Inches Minimum And 0.2480 Inches Maximum
- Second End Style [AAHP]
- Circular Grooved
- Second End Groove Width [AAHW]
- 0.0290 Inches Minimum And 0.0310 Inches Maximum
- Overall Length [ABHP]
- 3.2900 Inches Nominal
- Step Quantity [ATPC]
- 3
- Surface Finish [CSYM]
- 32.0 Microinches
Weapon Systems (WSDC) 3040-01-420-1165
DLA Procurement Analysis 3040-01-420-1165
- Last Stock Position:
- 7 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3040-01-420-1165
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-420-1165
Freight Information 3040-01-420-1165
3040-01-420-1165 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-420-1165 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-420-1165 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-420-1165 is not classified as a special type of cargo when transported by water. 3040-01-420-1165 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-420-1165
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- A-A-203, Kraft Wrapping Paper
- No Requirement
- Not Applicable
- MIL-DTL-117, Type III, Class C, Style 1, Medium Duty, Waterproof, Greaseproof, Opaque Bag
- No special marking
- A-A-203, Kraft Wrapping Paper
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Contracting Technical Data File (CTDF) 3040-01-420-1165 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: