Premium Information is available for this item - Upgrade for $1 a day
3040-01-420-1118
Shouldered Shaft
3040014201118 014201118 6404642 FIND 6 595-6404642-6 DF-2085-208 PIECE 6 6404642
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
1
Marketplace 3040-01-420-1118
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-420-1118 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-420-1118 RQST NE Updated Every Day 3040-01-420-1118 RQST
Updated Every Day 3040-01-420-1118 RQST NE Related Documents 3040-01-420-1118 5+ Documents ( More...
FIND 8 595-6404642-8 211017142 6404642 A cylindrical piece which moves or reciprocates in a cylinder
https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-420-1118 Shouldered Shaft 3040014201118 014201118
FIND 8 595-6404642-8 211017142 6404642 A cylindrical piece which moves or reciprocates in a cylinder
https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-420-1118 Shouldered Shaft 3040014201118 014201118
FIND 8 595-6404642-8 211017142 6404642 A cylindrical piece which moves or reciprocates in a cylinder
FIND 8595-6404642-82110171426404642 A cylindrical piece which moves or reciprocates in a BUY NE FedMall
FIND 9 DF2085-208F9 595-6404642-9 An open coiled spring, wound in various forms and from different shapes
FIND 9DF2085-208F9595-6404642-9 An open coiled spring, wound in various forms and from different BUY
Restrictions 3040-01-420-1118
3040-01-420-1118 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-420-1118
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-420-1118
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HDJB
Approved Sources 3040-01-420-1118
- Part Number
- Manufacturer
- Status
- 595-6404642-6
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Primary Buy
- Primary Buy
- DF-2085-208 PIECE 6
- 43689 - Huntington Ingalls Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 6404642 FIND 6
- 53711 - Naval Sea Systems Command (Active)
- Advisory Reference
- Advisory Reference
- 6404642
- 53711 - Naval Sea Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-420-1118
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Nickel Alloy
- Surface Finish [CSYM]
- 32.0 Microinches
- First End Style [AAGZ]
- Plain
- First End Diameter [AMDL]
- 2.7500 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- Circular Grooved And Externally Threaded
- Second End Groove Width [AAHW]
- 0.2500 Inches Nominal
- Second End Groove Diameter [AAHX]
- 0.8800 Inches Nominal
- Second End Distance From End To Groove [AMFQ]
- 0.6300 Inches Nominal
- Second End Diameter [AMFZ]
- 1.0000 Inches Nominal
- Second End External Thread Length [AMHA]
- 0.6300 Inches Nominal
- Largest Step Diameter [CSPY]
- 2.7500 Inches Nominal
- Overall Length [ABHP]
- 11.1900 Inches Nominal
- Step Quantity [ATPC]
- 3
- Special Features [FEAT]
- 1St End Countersunk,1.250 In. Minor Od, 2.000 In. Max. Od, Angular Cut 0.25 Degree
- End Item Identification [AGAV]
- Seawolf Class (Ssn)
Weapon Systems (WSDC) 3040-01-420-1118
DLA Procurement Analysis 3040-01-420-1118
Management Data 3040-01-420-1118
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-420-1118
Freight Information 3040-01-420-1118
3040-01-420-1118 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-420-1118 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-420-1118 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-420-1118 is not classified as a special type of cargo when transported by water. 3040-01-420-1118 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-420-1118
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- --
- --
- Vendor's Fiberboard Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Contracting Technical Data File (CTDF) 3040-01-420-1118 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- J
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: