Premium Information is available for this item - Upgrade for $1 a day
3040-01-418-6514
Shouldered Shaft
3040014186514 014186514 39068
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
1
Marketplace 3040-01-418-6514
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-418-6514 5+ Documents (More...)
$1 a day Upgrade your Account Upgrade 3040-01-565-2577Rigid Connecting Link3040015652577 015652577 39068
1 68F39068-1 FIXTURE,CELL DISCHA 2 EA NS Request Quotation Subscribe to View Vendor Details... 68F-39068
Shouldered Shaft 3040014186514 014186514 for $1 a day Upgrade your Account Upgrade 3040-01-418-
6514Shouldered Shaft3040014186514 014186514 39068 https//www.nsnlookup.com /cage Mayhew Steel Products
-900-02-4 C419/1/87062/002 CC 39068-900-02-4 419/1/87062/002 C-R39068-900-02-4 39068-9DA-02-1 A grouping
87062/002 K4556 - British Aerospace Defence Systems (Replaced) Secondary Buy RNCC 5 RNVC 2 DAC 2 CC 39068
001366220 68F39068-1 FIXTURE,CELL DISCHA 2 EA NS Request Quotation Subscribe to View Vendor Details... 68F-39068
day Upgrade your Account Upgrade 1560-01-054-1248Line Support Vent Fitting1560010541248 010541248 L-39068
Restrictions 3040-01-418-6514
3040-01-418-6514 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-418-6514
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-418-6514
- US Air Force (FXGC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- FXAX
Approved Sources 3040-01-418-6514
- Part Number
- Manufacturer
- Status
- 39068
- Manufacturer
- 89944 - Elbitamerica, Inc. (Active)
- Primary Buy
- Primary Buy
Datasheet 3040-01-418-6514
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Steel Comp 303
- Surface Finish [CSYM]
- 32.0 Microinches
- First End Style [AAGZ]
- Plain
- First End Diameter [AMDL]
- 0.0600 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- Two Flats
- Second End Diameter [AMFZ]
- 0.0770 Inches Nominal
- Second End Step Length [CTBM]
- 0.060 Inches Nominal
- Second End Angle Between Flats [CXYR]
- 120.0 Degrees Nominal
- Largest Step Diameter [CSPY]
- 0.1247 Inches Nominal
- Overall Length [ABHP]
- 0.930 Inches Nominal
- Step Quantity [ATPC]
- 5
- End Item Identification [AGAV]
- Aircraft,Hercules C-130
DLA Procurement Analysis 3040-01-418-6514
Management Data 3040-01-418-6514
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3040-01-418-6514
Freight Information 3040-01-418-6514
3040-01-418-6514 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-418-6514 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-418-6514 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-418-6514 is not classified as a special type of cargo when transported by water. 3040-01-418-6514 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-01-418-6514 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: