Premium Information is available for this item - Upgrade for $1 a day
3040-01-416-1663
Shouldered Shaft
3040014161663 014161663 211081688 564-6409340-11 6409340
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
1
Marketplace 3040-01-416-1663
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-416-1663 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-416-1663 RQST NE Updated Every Day 3040-01-416-1663 RQST
Updated Every Day 3040-01-416-1663 RQST NE Related Documents 3040-01-416-1663 5+ Documents ( More...
1663Shouldered Shaft3040014161663 014161663 211081688 Documents 3040-01-416-1663 5+ Documents ( More.
014161663 Upgrade your Account Upgrade 3040-01-416-1663Shouldered Shaft3040014161663 014161663 211081688
Shouldered Shaft 3040014161663 014161663 Upgrade your Account Upgrade 3040-01-416-1663Shouldered
Shaft3040014161663 014161663 211081688 564-6409340 -11 6409340 A shaft having two or more different
Shaft3040014161663 014161663 211081688 564-6409340 -11 6409340 A shaft having two or more different
diameters (greater than 0.031 inches (0.79 millimeter flat bearing surfaces. -8 564-6409340 -6 6409340
-15 6409340 A metal or plastic item of various shapes with two flat bearing surfaces.
shapes with two flat bearing surfaces. -8 564-6409340 -6 6409340 /fsg-53/fsc-5365/us 5365-01-529-2519
Restrictions 3040-01-416-1663
3040-01-416-1663 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-416-1663
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-416-1663
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HDJB
Approved Sources 3040-01-416-1663
- Part Number
- Manufacturer
- Status
- 211081688
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Primary Buy
- Primary Buy
- 564-6409340-11
- 53711 - Naval Sea Systems Command (Active)
- Secondary Buy
- Secondary Buy
- 6409340
- 53711 - Naval Sea Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-416-1663
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Item Identification [AGAV]
- Seawolf Class Ssn
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.7450 Inches Minimum And 0.7500 Inches Maximum
- First End Style [AAGZ]
- Plain
- Material [MATT]
- Steel
- Largest Step Diameter [CSPY]
- 0.7450 Inches Minimum And 0.7500 Inches Maximum
- Material Document And Classification [MDCL]
- Astm-A331 Assn Std Single Material Response
- Second End Diameter [AMFZ]
- 0.6300 Inches Minimum And 0.6500 Inches Maximum
- Second End Spline Length [AMGA]
- 3.500 Inches Nominal
- Second End Spline Major Diameter [AMGC]
- 0.6300 Inches Minimum And 0.6500 Inches Maximum
- Second End Spline Minor Diameter [AMGB]
- 0.5190 Inches Nominal
- Second End Spline Quantity [BDSR]
- 12
- Second End Style [AAHP]
- Splined (Involute)
- Second End Pitch Diameter [AMGF]
- 0.6000 Inches Nominal
- Second End Pressure Angle [AMGE]
- 30.0 Degrees Nominal
- Overall Length [ABHP]
- 23.8600 Inches Nominal
- Step Quantity [ATPC]
- 2
- Surface Finish [CSYM]
- 125.0 Microinches
Weapon Systems (WSDC) 3040-01-416-1663
DLA Procurement Analysis 3040-01-416-1663
Management Data 3040-01-416-1663
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-416-1663
Freight Information 3040-01-416-1663
3040-01-416-1663 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-416-1663 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-416-1663 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-416-1663 is not classified as a special type of cargo when transported by water. 3040-01-416-1663 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-416-1663
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 25.0" H x -- W x -- L
- --
- --
- --
- Any Suitable Process
- 25.0" H x -- W x -- L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- --
- --
- Any Suitable Fiber Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 3040-01-416-1663 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: