Premium Information is available for this item - Upgrade for $1 a day
3040-01-413-8263
Shouldered Shaft
3040014138263 014138263 585-5361566 ITEM 3 585-5361566
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
November 2023
1
Marketplace 3040-01-413-8263
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-413-8263 5+ Documents (More...)
(Identification) 1/2 NSN 3040-01-413-8263 (Identification) 2/2 - - 1.
BUY NE FedMall Updated Every Day 3040-01-413-8263 RQST NE Updated Every Day 3040-01-413-8263 RQST
/fsg-31/fsc-3120/us
Shouldered Shaft 3040014138263 014138263 Sleeve Bushing 3120014140760014140760 for $1 a day Upgrade
your Account Upgrade 3120-01-414-0760Sleeve Bushing3120014140760 014140760 585-5361566 RQST NE Updated
/www.nsnlookup.com /fsg-53/fsc-5330/us 5330-01-414-3675 Packing Retainer 5330014143675014143675 585-5361566
Shouldered Shaft 3040014138263 014138263 Threaded Standoff5340014129825 014129825 585-5361566 https
/www.nsnlookup.com /fsg-31/fsc-3120/us 3120-01-414-0760 Sleeve Bushing 3120014140760014140760 585-5361566
www.nsnlookup.com /fsg-53/fsc-5340/us 5340-01-412-9825 Spacing Threaded Standoff 5340014129825 585-5361566
/www.nsnlookup.com /fsg-53/fsc-5340/us 5340-01-412-9825 Spacing Threaded Standoff 5340014129825 585-5361566
G IMC Z IMCACTY HD Approved Sources 5340-01-412 https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-413-8263
Restrictions 3040-01-413-8263
3040-01-413-8263 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-413-8263
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-413-8263
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- GTJBHD
Approved Sources 3040-01-413-8263
- Part Number
- Manufacturer
- Status
- 585-5361566 ITEM 3
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Primary Buy
- Primary Buy
- 585-5361566
- 53711 - Naval Sea Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-413-8263
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Copper Alloy 632
- Material Document And Classification [MDCL]
- Mil-B-24059 Mil Spec Single Material Response
- First End Style [AAGZ]
- Tapered With Flat
- First End Taper Major Diameter [AMCR]
- 0.6520 Inches Nominal
- First End Taper Length [AMCS]
- 0.2050 Inches Nominal
- First End Taper [CWBK]
- 0.2350 Per Foot In Inches
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- Two Cross Drilled Holes And Externally Threaded
- Second End Diameter [AMFZ]
- 0.1200 Inches Nominal
- Second End Hole Diameter [AMGS]
- 0.1870 Inches Nominal
- Second End Distance From Hole Center To End [AMGT]
- 0.2500 Inches Nominal
- Second End External Thread Length [AMHA]
- 0.5000 Inches Nominal
- Second End Angle Between Holes [AMHZ]
- 180.0 Degrees Nominal
- Largest Step Diameter [CSPY]
- 0.1200 Inches Nominal
- Overall Length [ABHP]
- 5.5000 Inches Nominal
- Step Quantity [ATPC]
- 2
- End Item Identification [AGAV]
- Los Angeles Class Ssn (688)
Weapon Systems (WSDC) 3040-01-413-8263
DLA Procurement Analysis 3040-01-413-8263
- Last Stock Position:
- 2 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3040-01-413-8263
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-413-8263
Freight Information 3040-01-413-8263
3040-01-413-8263 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-413-8263 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-413-8263 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-413-8263 is not classified as a special type of cargo when transported by water. 3040-01-413-8263 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-413-8263
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 2.1" H x 1.3" W x 1.3" L
- --
- --
- Preservative Coating Only
- Any Suitable Process
- 2.1" H x 1.3" W x 1.3" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- Vendor's Protective Grease or Oil Coating
- --
- --
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Contracting Technical Data File (CTDF) 3040-01-413-8263 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: