Premium Information is available for this item - Upgrade for $1 a day
3040-01-413-6010
Shouldered Shaft
3040014136010 014136010 A-801-12581-31M 12156M1 IT4 PN A-801-12581-31M 12156M IT 4 P/N A-801-12581-31M 12156M1 12156M
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
1
Marketplace 3040-01-413-6010
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-413-6010 5+ Documents (More...)
Shouldered Shaft 3040014136010 014136010 3040-01-413-6010 3040014136010 014136010 is a shaft having
Elliott Manufacturing Co., Llc (Active) Canceled/Obsolete RNCC 5 RNVC 9 DAC 6 B-805-12156M1 72166 -
-1403A 500-6574890 LINE NO.220 12156M P/N B-805-12156-1403M 12156M-1403M B-805-12156-1403M 12156M An
Elliott Manufacturing Co., Llc (Active) Canceled/Obsolete RNCC 5 RNVC 9 DAC 6 B-805-12156M1 72166 -
-1403A 500-6574890 LINE NO.220 12156M P/N B-805-12156-1403M 12156M-1403M B-805-12156-1403M 12156M An
P/N A-803-12528-4 12156M1 An item which allows another item to be attached to one of a different size
day Upgrade your Account Upgrade 5330-00-447-6725Gasket5330004476725 004476725 12156 10A8622 CE806 12156M1
MEDALS DAC X CE806 81240 - White Farm Equipment Co (Obsolete) Canceled/Obsolete RNCC 5 RNVC 9 DAC X 12156M1
Restrictions 3040-01-413-6010
3040-01-413-6010 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-413-6010
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-413-6010
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
Approved Sources 3040-01-413-6010
- Part Number
- Manufacturer
- Status
- A-801-12581-31M
- Manufacturer
- 72166 - B.W. Elliott Manufacturing Co., Llc (Active)
- Primary Buy
- Primary Buy
- 12156M1 IT4 PN A-801-12581-31M
- 72166 - B.W. Elliott Manufacturing Co., Llc (Active)
- Secondary Buy
- Secondary Buy
- 12156M IT 4 P/N A-801-12581-31M
- 72166 - B.W. Elliott Manufacturing Co., Llc (Active)
- Secondary Buy
- Secondary Buy
- 12156M1
- 72166 - B.W. Elliott Manufacturing Co., Llc (Active)
- Informational Drawing
- Informational Drawing
- 12156M
- 72166 - B.W. Elliott Manufacturing Co., Llc (Active)
- Informational Drawing
- Informational Drawing
DLA Procurement Analysis 3040-01-413-6010
Management Data 3040-01-413-6010
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3040-01-413-6010
Freight Information 3040-01-413-6010
3040-01-413-6010 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-413-6010 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-413-6010 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-413-6010 is not classified as a special type of cargo when transported by water. 3040-01-413-6010 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-01-413-6010 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: