Premium Information is available for this item - Upgrade for $1 a day
3040-01-413-2635
Straight Shaft
3040014132635 014132635 MDD-452-4
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE. View more Straight Shaft
May 2023
1
Marketplace 3040-01-413-2635
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-413-2635 1+ Documents (More...)
Restrictions 3040-01-413-2635
3040-01-413-2635 is a Straight Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-413-2635
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-413-2635
- US Navy (N9BC)
- Effective Date:
- 1 Aug 2004
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
Approved Sources 3040-01-413-2635
- Part Number
- Manufacturer
- Status
- MDD-452-4
- Manufacturer
- 06793 - Belshaw Bros Inc (Obsolete)
- Original Design
- Original Design
Datasheet 3040-01-413-2635
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Item Identification [AGAV]
- Cutter,Dough-Nimitz Class Cvn (Attack Aircraft Carrier-Nuclear)
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.9970 Inches Minimum And 0.9990 Inches Maximum
- First End Spline Minor Diameter [AMDN]
- 0.8470 Inches Minimum
- First End Spline Quantity [BDSQ]
- 5
- First End Style [AAGZ]
- Splined (Involute)
- First End Spline Major Diameter [AMDP]
- 0.9990 Inches Maximum
- Material [MATT]
- Steel
- Second End Diameter [AMFZ]
- 1.0000 Inches Nominal
- Second End Style [AAHP]
- Two Flat Grooves
- Second End Grooved Flat Depth [AMJB]
- 0.125 Inches Nominal
- Overall Length [ABHP]
- 20.750 Inches Nominal
- Special Features [FEAT]
- Has 2 Flats At Second End .375 In. Wide,90 Degrees Of Each Other;3 Flats Near Center Parallel To Both Second End Flats;1 Woodruff Keyway Off Center
DLA Procurement Analysis 3040-01-413-2635
Management Data 3040-01-413-2635
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3040-01-413-2635
Freight Information 3040-01-413-2635
3040-01-413-2635 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-413-2635 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-413-2635 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-413-2635 is not classified as a special type of cargo when transported by water. 3040-01-413-2635 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-01-413-2635 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: