Premium Information is available for this item - Upgrade for $1 a day
3040-01-412-5281
Shouldered Shaft
3040014125281 014125281 D94000826 FN MPLM-A6 D94000826-A6 231-6758828FNMPLM-A6 6758828
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
1
Marketplace 3040-01-412-5281
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-412-5281 5+ Documents (More...)
(Identification) 1/2 NSN 3040-01-412-5281 (Identification) 2/2 - - 1.
BUY NE FedMall Updated Every Day 3040-01-412-5281 RQST NE Updated Every Day 3040-01-412-5281 RQST
588-35833040015883583015883583 is a shaft having https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-412-5281
Shouldered Shaft 3040014125281 014125281 3040-01-412-5281Shouldered Shaft3040014125281 014125281
only. see also washer, flat and spacer, sleeve. https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-412-5281
Shouldered Shaft 3040014125281 014125281 3040-01-412-5281 3040014125281 014125281 is a shaft having
www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-412-9834 Hexagon Extended Washer Plain Nut 014129834 6758828
Shouldered Shaft 3040014125281 014125281 412-5281 Shouldered Shaft 3040014125281014125281 https
/fsg-30/fsc-3040/us
$1 a day Upgrade your Account Upgrade 3120-00-235-1814Thrust Washer Bearing3120002351814 002351814 6758828
/fsg-30/fsc-3040/us 3040-01-412-5282 Straight Shaft 3040014125282014125282 3120002351814002351814 6758828
Restrictions 3040-01-412-5281
3040-01-412-5281 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-412-5281
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-412-5281
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HDJBHX
Approved Sources 3040-01-412-5281
- Part Number
- Manufacturer
- Status
- D94000826 FN MPLM-A6
- Manufacturer
- 96169 - Electric Boat Corporation (Active)
- Primary Buy
- Primary Buy
- D94000826-A6
- 96169 - Electric Boat Corporation (Active)
- Primary Buy
- Primary Buy
- 231-6758828FNMPLM-A6
- 53711 - Naval Sea Systems Command (Active)
- Secondary Buy
- Secondary Buy
- 6758828
- 53711 - Naval Sea Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-412-5281
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Copper Alloy
- Material Document And Classification [MDCL]
- Mil-B-5687,Type 1,Grade 1 Fed Spec Single Material Response
- Surface Finish [CSYM]
- 63.0 Microinches
- First End Style [AAGZ]
- Plain
- First End Diameter [AMDL]
- 1.5000 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- Externally And Internally Threaded
- Second End Diameter [AMFZ]
- 0.7500 Inches Nominal
- Second End External Thread Length [AMHA]
- 0.6300 Inches Nominal
- Second End Internal Thread Length [AMHP]
- 1.2500 Inches Nominal
- Largest Step Diameter [CSPY]
- 1.500 Inches Nominal
- Overall Length [ABHP]
- 2.280 Inches Nominal
- Step Quantity [ATPC]
- 3
- Special Features [FEAT]
- 1St End Has 2 Notches,0.218 In.Wide,180 Degrees Apart;2Nd End Int Thds Are Lh
- End Item Identification [AGAV]
- General Dynamics Corp Seawolf Class Submarine
DLA Procurement Analysis 3040-01-412-5281
Management Data 3040-01-412-5281
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-412-5281
Freight Information 3040-01-412-5281
3040-01-412-5281 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-412-5281 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-412-5281 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-412-5281 is not classified as a special type of cargo when transported by water. 3040-01-412-5281 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-01-412-5281 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: