Premium Information is available for this item - Upgrade for $1 a day
3040-01-412-0286
Straight Shaft
3040014120286 014120286 D204811S001-19 D204811S001 ITEM 19 D204811S001
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE. View more Straight Shaft
May 2023
1
Marketplace 3040-01-412-0286
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-412-0286 5+ Documents (More...)
/fsg-30/fsc-3040/us
BUY NE FedMall Updated Every Day 3040-01-412-0286 RQST NE Updated Every Day 3040-01-412-0286 RQST
Updated Every Day 3040-01-412-0286 RQST NE Related Documents 3040-01-412-0286 5+ Documents ( More...
-19 D204811S001 ITEM 19 D204811S001 A straight shaft having two or more of the following conditions:
-01-412-0289 Control Cam 3040014120289 014120289 -25 D204811S001 ITEM 25 D204811S001 An irregularly shaped
/fsg-39/fsc-3990/us
//www.nsnlookup.com /fsg-39/fsc-3990/us 3990-01-411-7453 Material Handling Roller 3990014117453 D204811S001
/www.nsnlookup.com /fsg-39/fsc-3990/us 3990-01-411 -7453 Material Handling Roller 3990014117453 D204811S001
/fsg-30/fsc-3040/us
https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-412-0286 Straight Shaft 3040014120286 014120286
-19 D204811S001 ITEM 19 D204811S001 A straight shaft having two or more of the following conditions:
ITEM 20 D204811S001 A straight shaft having two or more of the following conditions: /www.nsnlookup.com
Straight Shaft 3040014120286 014120286 -19 D204811S001 ITEM 19 D204811S001 A straight shaft having
Restrictions 3040-01-412-0286
3040-01-412-0286 is a Straight Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-412-0286
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-412-0286
- US Navy (N9BC)
- Effective Date:
- 1 Aug 2004
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- GTHD
Approved Sources 3040-01-412-0286
- Part Number
- Manufacturer
- Status
- D204811S001-19
- Manufacturer
- 98523 - Jered Llc (Active)
- Primary Buy
- Primary Buy
- D204811S001 ITEM 19
- 98523 - Jered Llc (Active)
- Secondary Buy
- Secondary Buy
- D204811S001
- 98523 - Jered Llc (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-412-0286
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Identical
- First End Diameter [AMDL]
- 0.7480 Inches Minimum And 0.7490 Inches Maximum
- First End Grooved Flat Depth [AMFH]
- 0.2177 Inches Nominal
- First End Grooved Flat Length [AMFG]
- 0.3125 Inches Nominal
- First End Distance From End To Flat [AMCM]
- 0.1875 Inches Nominal
- First End Style [AAGZ]
- Flat Grooved
- Material [MATT]
- Steel Comp 316
- Overall Length [ABHP]
- 11.8125 Inches Nominal
- Surface Finish [CSYM]
- 32.0 Microinches
Weapon Systems (WSDC) 3040-01-412-0286
DLA Procurement Analysis 3040-01-412-0286
Management Data 3040-01-412-0286
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-412-0286
Freight Information 3040-01-412-0286
3040-01-412-0286 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-412-0286 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-412-0286 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-412-0286 is not classified as a special type of cargo when transported by water. 3040-01-412-0286 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-01-412-0286 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: