Premium Information is available for this item - Upgrade for $1 a day
3040-01-411-8473
Shouldered Shaft
3040014118473 014118473 12364824
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
August 2023
3
Marketplace 3040-01-411-8473
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-411-8473 1+ Documents (More...)
Shouldered Shaft 3040014118473 014118473 3040-01-411-8473 3040014118473 014118473 is a shaft having
Restrictions 3040-01-411-8473
3040-01-411-8473 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-411-8473
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-411-8473
- US Army (A920)
- Effective Date:
- 1 Jun 2006
- Former MOE Rule:
- A181
- Supplementary Receivers:
- AZ
- US Marine Corps (MC40)
- Effective Date:
- 1 Jun 2006
- Former MOE Rule:
- MC01
- US Navy (N9BC)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GG
- Australia (ZA01)
- Effective Date:
- 1 Aug 2011
Approved Sources 3040-01-411-8473
- Part Number
- Manufacturer
- Status
- 12364824
- Manufacturer
- 06085 - Bae Systems Land & Armaments L.P. (Active)
- Primary Buy
- Primary Buy
- 12364824
- 19207 - U S Army Tank Automotive Command (Active)
- Secondary Buy
- Secondary Buy
- 12364824
- 076M6 - Bae Systems Land & Armaments L.P. (Active)
- Secondary Buy
- Secondary Buy
Datasheet 3040-01-411-8473
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Item Identification [AGAV]
- 2350-01-390-4683
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 1.4549 Inches Nominal
- First End Spline Minor Diameter [AMDN]
- 1.3536 Inches Nominal
- First End Spline Quantity [BDSQ]
- 34
- First End Style [AAGZ]
- Splined (Straight)
- First End Spline Length [AMDM]
- 0.630 Inches Nominal
- First End Spline Major Diameter [AMDP]
- 1.4549 Inches Nominal
- Material [MATT]
- Steel Comp 1030 Or Steel Comp 1045
- Largest Step Diameter [CSPY]
- 1.4995 Inches Nominal
- Material Document And Classification [MDCL]
- Astm A108 Assn Std Single Material Response
- Second End Diameter [AMFZ]
- 1.4549 Inches Nominal
- Second End Spline Length [AMGA]
- 0.510 Inches Nominal
- Second End Spline Major Diameter [AMGC]
- 1.4549 Inches Nominal
- Second End Spline Minor Diameter [AMGB]
- 1.3536 Inches Nominal
- Second End Spline Quantity [BDSR]
- 34
- Second End Style [AAHP]
- Splined (Straight)
- Overall Length [ABHP]
- 13.120 Inches Nominal
- Special Features [FEAT]
- Both Ends Grooved, First End Splines 0.180 In. From End, Second End Splines 0.170 In. From End, Finish Cadmium Plate Type Ii, Class 2 Per Spec Qq-P-416
- Step Quantity [ATPC]
- 3
Weapon Systems (WSDC) 3040-01-411-8473
DLA Procurement Analysis 3040-01-411-8473
Management Data 3040-01-411-8473
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 2
- Non-Critical Repair Part
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 3040-01-411-8473
Freight Information 3040-01-411-8473
3040-01-411-8473 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-411-8473 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-411-8473 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-411-8473 is not classified as a special type of cargo when transported by water. 3040-01-411-8473 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-411-8473
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 15.2" H x -- W x -- L
- --
- --
- --
- Any Suitable Process
- 15.2" H x -- W x -- L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- ASTM-D4727, Fiberboard used as Pads, Cells, Die-cuts or Sleeves
- --
- ASTM - D5118, Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 3040-01-411-8473 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- P
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: