Premium Information is available for this item - Upgrade for $1 a day
3040-01-406-8538
Shouldered Shaft
3040014068538 014068538 564-6408197 FIND 8 211066801 6408197 FN 8 6408197 FN 8SS 564-6408197 FIND 8SS 211066801SS
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
3
Marketplace 3040-01-406-8538
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-406-8538 5+ Documents (More...)
RQST NE Updated Every Day 3040-01-406-8538 RQST Updated Every Day 3040-01-406-8538 RQST NE Related Documents
3040-01-406-8538 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-406-8538
DEMILI : | CRITICALITY : | HMIC : | PMIC https https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-406-8538
Shouldered Shaft 3040014068538 014068538 your Account Upgrade 3040-01-406-8538Shouldered Shaft3040014068538
6408197 FN 8 6408197 FN 8SS 564-6408197 FIND 8SS 211066801SS A shaft having two or https https//www.nsnlookup.com
Shouldered Shaft 3040014068538 014068538 FIND 8 211066801 6408197 FN 8 6408197 FN 8SS 564-6408197
6408197 FN 8 6408197 FN 8SS 564-6408197 FIND 8SS 211066801SS A shaft having two or https//www.nsnlookup.com
www.nsnlookup.com /fsg-30/fsc-3010/us 3010-01-464-8043 Angle Drive Unit 30100146480430146480436408197 FIND 8SS 211066801SS
/fsg-31/fsc-3120/us
6408197 FN 12 564-6408197 FIND 12SS6408197 FN 12SS A tubular shaped item with or without flange FIND 8 211066801
FIND 8SS 211066801SS A shaft having two or https https//www.nsnlookup.com /fsg-31/fsc-3120/us 3120-01
Restrictions 3040-01-406-8538
IUID Required
3040-01-406-8538 is a Shouldered Shaft that is specifically designed to be or selected as being nuclear hard. In addition it has other critical features such as tolerance, fit restrictions or application.This item has been confirmed as a Critical Munitions List Item or a Sensitive Commerce Control List Item and cannot be in the possession of any party anywhere in the World who is not an authorized NATO Government. Any other possessor of this item should mutilate it now as possession violates international and local laws. This item is a US Munitions List Item and must be mutilated to scrap. This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-406-8538
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-406-8538
- US Navy (N1H5)
- Effective Date:
- 1 Jan 1995
- Supplementary Collaborators:
- JB
- Supplementary Receivers:
- GG
Approved Sources 3040-01-406-8538
- Part Number
- Manufacturer
- Status
- 564-6408197 FIND 8
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Incomplete Reference
- Incomplete Reference
- 211066801
- 53711 - Naval Sea Systems Command (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 6408197 FN 8
- 53711 - Naval Sea Systems Command (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 6408197 FN 8SS
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
- 564-6408197 FIND 8SS
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
- 211066801SS
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
Datasheet 3040-01-406-8538
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Criticality Code Justification [CRTL]
- Zzzy
- End Similarity [AAHN]
- Identical
- First End Diameter [AMDL]
- 0.8750 Inches Maximum
- First End Hole Diameter [AMDX]
- 0.3750 Inches Nominal
- First End Keyway Depth [AMDG]
- 0.1830 Inches Minimum
- First End Keyway Width [AMCZ]
- 0.1860 Inches Minimum
- First End External Keyway Length [AMDE]
- 1.2500 Inches Nominal
- First End Style [AAGZ]
- Flat Keyway And Cross Drilled Hole
- Material Document And Classification [MDCL]
- Qq-N-286 Fed Spec Single Material Response
- Material [MATT]
- Nickel Alloy
- Largest Step Diameter [CSPY]
- 1.1300 Inches Nominal
- Reference Number Differentiating Characteristics [ZZZY]
- Quality Control In Accordance With Navships 0948-045-7010 Material Identification And Control Instruction For Subsafe Items
- Overall Length [ABHP]
- 15.5000 Inches Nominal
- Step Quantity [ATPC]
- 1
Management Data 3040-01-406-8538
Navy
- Cognizance:
- 1H
- Consumable material assigned to NAVICP MECH for inventory management
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- L1
- An item that supports either a SUBSAFE or Level 1 system that has undergone the extreme material control and quality assurance techniques that provide objective evidence of its acceptance for its appropriate application. Each item has certification papers (or special markings that provide traceability to the certification) that pedigree its material and physical properties, provide traceability, to manufacturer, contract list and lot, and document the quality assurance system and test requirements applied to the item.
- Issue, Repair, Requisition Restriction Code:
- 00
- No Restriction
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
Similar Supply Items to 3040-01-406-8538
Freight Information 3040-01-406-8538
3040-01-406-8538 has freight characteristics managed by the Food and Drug Administration (FDA).It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-406-8538 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-406-8538 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-406-8538 is not classified as a special type of cargo when transported by water. 3040-01-406-8538 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-406-8538
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
- Storage Environment
- Unheated General Purpose
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Preservative Coating Only
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- MIL-PRF-16173, Grade 2, Corrosion Preventive, Solvent Cutback, Cold Application, Soft Film
- MIL-PRF-121, Greaseproof, Waterproof Barrier
- ASTM-D4727, Fiberboard used as Pads, Cells, Die-cuts or Sleeves
- Not Applicable
- ASTM-D5118, Type CF, Class Domestic, Corrugated Fiberboard Box
- Open for inspection or use only
- MIL-PRF-121, Greaseproof, Waterproof Barrier
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement