Premium Information is available for this item - Upgrade for $1 a day
3040-01-400-6068
Shouldered Shaft
3040014006068 014006068 585-6406777-61 211064507 6406777-61 6406777
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
1
Marketplace 3040-01-400-6068
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-400-6068 5+ Documents (More...)
Shouldered Shaft 3040014006068014006068 585-6406777-612110645076406777 RQST NE Updated Every Day 3040
014062283 -63 6406777 A pulley with one or more grooved faces or rims of the same diameter. 014006068
Shouldered Shaft 3040014006068 014006068 Upgrade your Account Upgrade 3040-01-400-6068Shouldered
Shaft3040014006068 014006068 585-6406777-61 211064507 Updated Every Day 3040-01-400-6068 RQST NE Related
www.nsnlookup.com /fsg-59/fsc-5985/us 5985-01-421-2993 Antenna Support 5985014212993014212993 585-6406777
$1 a day Upgrade your Account Upgrade 5985-01-421-2993Antenna Support5985014212993 014212993 585-6406777
ASS Y 92 6406777 FIND #92 585-6406777-92 A standoff that must have a threaded end(s) or be internally
https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-400-6068 Shouldered Shaft 3040014006068 014006068
-71 6406777 A pulley with one or more grooved faces or rims of the same diameter.
014006068 Upgrade your Account Upgrade 3040-01-400-6068Shouldered Shaft3040014006068 014006068 585-6406777
Restrictions 3040-01-400-6068
3040-01-400-6068 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-400-6068
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-400-6068
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HDJB
Approved Sources 3040-01-400-6068
- Part Number
- Manufacturer
- Status
- 585-6406777-61
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Primary Buy
- Primary Buy
- 211064507
- 53711 - Naval Sea Systems Command (Active)
- Secondary Buy
- Secondary Buy
- 6406777-61
- 53711 - Naval Sea Systems Command (Active)
- Secondary Buy
- Secondary Buy
- 6406777
- 53711 - Naval Sea Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-400-6068
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.6240 Inches Minimum And 0.6250 Inches Maximum
- First End Internal Thread Length [AMER]
- 1.000 Inches Minimum And 1.120 Inches Maximum
- First End Style [AAGZ]
- Internal Threaded
- Material Document And Classification [MDCL]
- Qq-S-766 Cl 316L,Cond A,Fin 1 Fed Spec Single Material Response
- Material [MATT]
- Steel Corrosion Resisting
- Largest Step Diameter [CSPY]
- 0.880 Inches Nominal
- Second End Diameter [AMFZ]
- 0.6260 Inches Minimum And 0.6270 Inches Maximum
- Second End Step Length [CTBM]
- 0.245 Inches Nominal
- Second End Style [AAHP]
- Hexagonal
- Second End Width Across Flats [ACMD]
- 0.880 Inches Nominal
- Overall Length [ABHP]
- 3.120 Inches Nominal
- Step Quantity [ATPC]
- 3
Weapon Systems (WSDC) 3040-01-400-6068
DLA Procurement Analysis 3040-01-400-6068
Management Data 3040-01-400-6068
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-400-6068
Freight Information 3040-01-400-6068
3040-01-400-6068 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-400-6068 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-400-6068 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-400-6068 is not classified as a special type of cargo when transported by water. 3040-01-400-6068 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-400-6068
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- MIL-DTL-117, Type III, Class C, Style 1, Medium Duty, Waterproof, Greaseproof, Opaque Bag
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Contracting Technical Data File (CTDF) 3040-01-400-6068 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: