Premium Information is available for this item - Upgrade for $1 a day
3040-01-399-0912
Shouldered Shaft
3040013990912 013990912 50004-2 40074 ITEM NO 7 50004 DASH 2 50004 40074
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
November 2023
1
Marketplace 3040-01-399-0912
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-399-0912 5+ Documents (More...)
KE AMC 0 AMSC 0 IMC Z IMCACTY KE Approved Sources 6615-00-915-4549 Part NumberManufacturerStatus98-50004
-2 61515 - Timex Corp (Active) Original Design RNCC 3 RNVC 9 DAC 1 98-50004-2 63395 - Atlantic Inertial
Details... 14170 ADJUSTER,LEFT HAND 1 EA NS Request Quotation Subscribe to View Vendor Details... 40074
ADJUSTER,LEFT https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-399-0912 Shouldered Shaft 3040013990912
CIRCUIT CARD ASSEMBLY 11 EA NS Request Quotation 40074 CIRCUIT CARD ASSEMBLY 11 EA NS Request Quotation
https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-399-0912 Shouldered Shaft 3040013990912 013990912
Shouldered Shaft 3040013990912 013990912 for $1 a day Upgrade your Account Upgrade 3040-01-399-
0912Shouldered Shaft3040013990912 013990912 50004-2 AMC 0 AMSC 0 IMC Z IMCACTY KE Approved Sources 6615
Shouldered Shaft 3040013990912 013990912 having two or more different diameters (greater KE AMC
0 AMSC 0 IMC Z IMCACTY KE Approved Sources 6615-00-915-4549 NumberManufacturerStatus98-50004 -2 61515
Restrictions 3040-01-399-0912
3040-01-399-0912 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-399-0912
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-399-0912
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
- Spain (YB01)
- Effective Date:
- 1 Mar 2001
Approved Sources 3040-01-399-0912
- Part Number
- Manufacturer
- Status
- 50004-2
- Manufacturer
- 66822 - Morpac Industries, Inc (Active)
- Primary Buy
- Primary Buy
- 40074 ITEM NO 7
- 66822 - Morpac Industries, Inc (Active)
- Secondary Buy
- Secondary Buy
- 50004 DASH 2
- 66822 - Morpac Industries, Inc (Active)
- Secondary Buy
- Secondary Buy
- 50004
- 66822 - Morpac Industries, Inc (Active)
- Informational Drawing
- Informational Drawing
- 40074
- 66822 - Morpac Industries, Inc (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-399-0912
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.4840 Inches Nominal
- First End Style [AAGZ]
- Plain
- Material [MATT]
- Steel Comp 17-4Ph
- Largest Step Diameter [CSPY]
- 0.748 Inches Maximum
- Second End Distance From Keyway Center To End [AMFW]
- 0.562 Inches Nominal
- Second End External Keyway Length [AMFS]
- 0.2500 Inches Nominal
- Second End Diameter [AMFZ]
- 0.4840 Inches Nominal
- Second End Style [AAHP]
- Woodruff Keyway And Internally Threaded
- Second End Internal Thread Length [AMHP]
- 0.380 Inches Nominal
- Second End Keyway Width [AMFR]
- 0.1240 Inches Minimum And 0.1255 Inches Maximum
- Overall Length [ABHP]
- 8.187 Inches Nominal
- Special Features [FEAT]
- First End Has American Standard Double Lead Worm
- Step Quantity [ATPC]
- 10
Weapon Systems (WSDC) 3040-01-399-0912
DLA Procurement Analysis 3040-01-399-0912
- Last Stock Position:
- 16 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3040-01-399-0912
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3040-01-399-0912
Freight Information 3040-01-399-0912
3040-01-399-0912 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-399-0912 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-399-0912 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-399-0912 is not classified as a special type of cargo when transported by water. 3040-01-399-0912 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-399-0912
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- Vendor's Protective Grease or Oil Coating
- MIL-PRF-121, Greaseproof, Waterproof Barrier
- --
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- MIL-PRF-121, Greaseproof, Waterproof Barrier
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Procurement History 3040-01-399-0912 1 Records
Contracting Technical Data File (CTDF) 3040-01-399-0912 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: