Premium Information is available for this item - Upgrade for $1 a day
3040-01-396-1533
Shouldered Shaft
3040013961533 013961533 40014-1 40015 ITEM 3 40014 40015
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
1
Marketplace 3040-01-396-1533
Request a Quotation from participating marketplace vendors
Updated Every 15 Minutes 
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 3040-01-396-1533 5+ Documents (More...)
(greater than 0.031 diameters (greater than 0.031 Circuit Card Assembly 5998014453271 014453271 -2 40014
-1 A grouping of -1 50301-40014-1 A flexible item designed to be affixed to an object by adhesion or
https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-396-1533 Shouldered Shaft 3040013961533 013961533
for $1 a day Upgrade your Account Upgrade 3040-01-396-1533Shouldered Shaft3040013961533 013961533 40014
NS Request Quotation Subscribe to View Vendor Details... 40015 PAWL 240 EA NS Request Quotation 40015
GEAR CLUSTER 7 EA -1 40015 ITEM 3 4001440015 A shaft having two or more different diameters (greater
https//www.nsnlookup.com /fsg-76/fsc-7690/us 7690-01-666-3804 Label 7690016663804 016663804,50301-40014
https//www.nsnlookup.com /fsg-76/fsc-7690/us 7690-01-666-3804 Label 7690016663804 016663804,50301-40014
WD4181-40014-6059 An item conforming to the definition of WIRING HARNESS with branches (forks). -6059
-001 A transformer which is designed so that part or all of its range of RQST NE Updated -001407-8-40014
Restrictions 3040-01-396-1533
3040-01-396-1533 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-396-1533
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-396-1533
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
Approved Sources 3040-01-396-1533
- Part Number
- Manufacturer
- Status
- 40014-1
- Manufacturer
- 66822 - Morpac Industries, Inc (Active)
- Primary Buy
- Primary Buy
- 40015 ITEM 3
- 66822 - Morpac Industries, Inc (Active)
- Secondary Buy
- Secondary Buy
- 40014
- 66822 - Morpac Industries, Inc (Active)
- Informational Drawing
- Informational Drawing
- 40015
- 66822 - Morpac Industries, Inc (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-396-1533
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Steel Comp 17-4Ph
- Surface Finish [CSYM]
- 63.0 Microinches
- First End Style [AAGZ]
- Slotted
- First End Diameter [AMDL]
- 0.3400 Inches Nominal
- First End Slot Depth [AMDW]
- 0.0900 Inches Nominal
- First End Slot Width [AKTM]
- 0.0500 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- External Threaded
- Second End Diameter [AMFZ]
- 0.1900 Inches Nominal
- Second End External Thread Length [AMHA]
- 0.4000 Inches Nominal
- Largest Step Diameter [CSPY]
- 0.3400 Inches Nominal
- Overall Length [ABHP]
- 2.8000 Inches Nominal
- Step Quantity [ATPC]
- 3
- Special Features [FEAT]
- Threaded End Is 10-32 Unf-2A; Slotted End Is 0.340 Spherical Diameter
- End Item Identification [AGAV]
- Arleigh Burke Class
Weapon Systems (WSDC) 3040-01-396-1533
DLA Procurement Analysis 3040-01-396-1533
Management Data 3040-01-396-1533
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-396-1533
Freight Information 3040-01-396-1533
3040-01-396-1533 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-396-1533 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-396-1533 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-396-1533 is not classified as a special type of cargo when transported by water. 3040-01-396-1533 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-396-1533
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Contracting Technical Data File (CTDF) 3040-01-396-1533 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: