Premium Information is available for this item - Upgrade for $1 a day
3040-01-395-5244
Straight Shaft
3040013955244 013955244 4-195-1-00860
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE. View more Straight Shaft
May 2023
3
Marketplace 3040-01-395-5244
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-395-5244 5+ Documents (More...)
12361 4-195-1-00860 471 8 5120-01-481-6770 12361 6-511 https//www.nsnlookup.com /equipment-intelligence
1108-02 278 5 3020-01-294-8805 71041 H1086RH 278 6 5315-01-456-4809 12361 6-570-060521 278 7 3040-01-395-5244
3040-01-395-5244 471 7 12361 4-195-1-00871 5340-01-394-4477 471 30 12361 4-195-6-00013 5340-01
12361 4-195-1-00860 278 8 5120-01-481-6770 12361 6-511-001260 278 9 5325-01-368-8703 12361 7-753
12361 4-195-1-00860 471 8 5120-01-481-6770 12361 6-511-001260 471 9 5325-01-368-8703 12361 7-753
3040-01-395-5244 278 7 12361 4-195-1-00871 5340-01-394-4477 278 30 81343 4-2 010102S 4730-00-473
Restrictions 3040-01-395-5244
3040-01-395-5244 is a Straight Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-395-5244
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-395-5244
- US Army (A920)
- Effective Date:
- 1 Jun 2006
- Former MOE Rule:
- A181
- Supplementary Receivers:
- AZ
Approved Sources 3040-01-395-5244
- Part Number
- Manufacturer
- Status
- 4-195-1-00860
- Manufacturer
- 12361 - Grove U.S. Llc (Active)
- Primary Buy
- Primary Buy
- 4-195-1-00860
- 076M6 - Bae Systems Land & Armaments L.P. (Active)
- Secondary Buy
- Secondary Buy
- 4-195-1-00860
- 0FW39 - Bae Systems Tactical Vehicle Systems (Active)
- Secondary Buy
- Secondary Buy
Datasheet 3040-01-395-5244
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Steel Comp 1018
- First End Style [AAGZ]
- Circular Grooved
- First End Groove Width [AAHG]
- 0.0460 Inches Nominal
- First End Groove Diameter [AAHH]
- 0.8240 Inches Maximum
- First End Distance From End To Groove [AMCY]
- 0.0900 Inches Nominal
- First End Diameter [AMDL]
- 0.8740 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- Woodruff Keyway And Circular Grooved
- Second End Groove Width [AAHW]
- 0.0460 Inches Nominal
- Second End Groove Diameter [AAHX]
- 0.7070 Inches Nominal
- Second End Distance From End To Groove [AMFQ]
- 12.181 Inches Nominal
- Second End Keyway Width [AMFR]
- 0.1860 Inches Nominal
- Second End External Keyway Length [AMFS]
- 0.6250 Inches Nominal
- Second End Distance From Keyway Center To End [AMFW]
- 11.690 Inches Nominal
- Second End Diameter [AMFZ]
- 0.7500 Inches Nominal
- Overall Length [ABHP]
- 12.2500 Inches Nominal
- Special Features [FEAT]
- Second Keyway Offcenter 2.94 In From First End
- End Item Identification [AGAV]
- 2320-01-354-3385
Weapon Systems (WSDC) 3040-01-395-5244
DLA Procurement Analysis 3040-01-395-5244
Management Data 3040-01-395-5244
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
NATO Stock Numbers Related to 3040-01-395-5244
Freight Information 3040-01-395-5244
3040-01-395-5244 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-395-5244 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-395-5244 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-395-5244 is not classified as a special type of cargo when transported by water. 3040-01-395-5244 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-395-5244
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 14.2" H x 3.0" W x 3.0" L
- --
- --
- --
- Any Suitable Process
- 14.2" H x 3.0" W x 3.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- Any Suitable Fiber Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Contracting Technical Data File (CTDF) 3040-01-395-5244 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: