Premium Information is available for this item - Upgrade for $1 a day
3040-01-391-9804
Shouldered Shaft
3040013919804 013919804 512-6404652 FIND 125 512-6404652 FIND 3L1 512-6404652 FIND 125L1 512-6404653-33L1 512-6404652 FIND 3 512-6404652 FN 126L1 512-6404652 FIND 127 512-6404653 FIND 33 512-6404652 FIND 127L1 512-6404653 FIND 33L1 512-6404652 FN 126 512-6404652 FIND163L1
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
January 2024
7
Marketplace 3040-01-391-9804
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-391-9804 5+ Documents (More...)
512-6404652 FN 126L1 512-6404652 FIND 127 512-6404653 FIND 33 512-6404652 FIND 127L1 512-6404653 FIND
33L1 512-6404652 FN 126 512-6404652 FIND163L1 A shaft having two or more different diameters (greater
Shaft 3040014752163 014752163 FIND 109 512-6404653 FIND 33 512-6404652 FIND 127 512-6404652 FIND 127L1
https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-391-9804 Shouldered Shaft 3040013919804 013919804
Shouldered Shaft 3040013919804 013919804 6404652 FIND 3L1 512-6404652 FIND 125L1 512-6404653-33L1
512-6404652 FIND 3 512-6404652 FN 126L1 512-6404652 FIND 127 512-6404653 FIND 33512-6404652 FIND 127L1
Shouldered Shaft 3040013919804 013919804 FN 126L1 512-6404652 FIND 127 512-6404653 FIND 33 512-6404652
512-6404653 FIND 109L1 A shaft -33L1 512-6404652 FIND 3 512-6404652 126L1 512 -6404652 FIND
512-6404652 FIND 3 512-6404652 FN 126L1 512-6404652 FIND 127 512 FIND 125L1 512-6404653-33L1 512
/fsc-3040/us 3040-01-391-9804 Shouldered Shaft 3040013919804 013919804 FIND 125 512-6404652 FIND 3L1
Restrictions 3040-01-391-9804
IUID Required
3040-01-391-9804 is a Shouldered Shaft that is specifically designed to be or selected as being nuclear hard. In addition it has other critical features such as tolerance, fit restrictions or application.This item has been confirmed as a Critical Munitions List Item or a Sensitive Commerce Control List Item and cannot be in the possession of any party anywhere in the World who is not an authorized NATO Government. Any other possessor of this item should mutilate it now as possession violates international and local laws. This item is a US Munitions List Item and must be mutilated to scrap. This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-391-9804
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-391-9804
- US Navy (N1H5)
- Effective Date:
- 1 Jun 1994
- Supplementary Collaborators:
- JB
- Supplementary Receivers:
- GG
Approved Sources 3040-01-391-9804
- Part Number
- Manufacturer
- Status
- 512-6404652 FIND 125
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Incomplete Reference
- Incomplete Reference
- 512-6404652 FIND 3L1
- 03950 - Naval Inventory Control Point (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 512-6404652 FIND 125L1
- 03950 - Naval Inventory Control Point (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 512-6404653-33L1
- 03950 - Naval Inventory Control Point (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 512-6404652 FIND 3
- 53711 - Naval Sea Systems Command (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 512-6404652 FN 126L1
- 03950 - Naval Inventory Control Point (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 512-6404652 FIND 127
- 53711 - Naval Sea Systems Command (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 512-6404653 FIND 33
- 53711 - Naval Sea Systems Command (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 512-6404652 FIND 127L1
- 03950 - Naval Inventory Control Point (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 512-6404653 FIND 33L1
- 03950 - Naval Inventory Control Point (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 512-6404652 FN 126
- 53711 - Naval Sea Systems Command (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 512-6404652 FIND163L1
- 03950 - Naval Inventory Control Point (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
Datasheet 3040-01-391-9804
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Item Identification [AGAV]
- Diesel Exhaust Gagging Gear
- Criticality Code Justification [CRTL]
- Zzzy
- Material [MATT]
- Nickel Alloy
- Reference Number Differentiating Characteristics [ZZZY]
- Quality Control In Accordance With Navships 0948-045-7010 Material Identification And Control Instruction For Subsafe Items
- Special Features [FEAT]
- Shaft,Gag
Management Data 3040-01-391-9804
Navy
- Cognizance:
- 1H
- Consumable material assigned to NAVICP MECH for inventory management
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- L1
- An item that supports either a SUBSAFE or Level 1 system that has undergone the extreme material control and quality assurance techniques that provide objective evidence of its acceptance for its appropriate application. Each item has certification papers (or special markings that provide traceability to the certification) that pedigree its material and physical properties, provide traceability, to manufacturer, contract list and lot, and document the quality assurance system and test requirements applied to the item.
- Issue, Repair, Requisition Restriction Code:
- 00
- No Restriction
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
NATO Stock Numbers Related to 3040-01-391-9804
Freight Information 3040-01-391-9804
3040-01-391-9804 has freight characteristics managed by the Food and Drug Administration (FDA).It has a National Motor Freight Classification (NMFC) of 132330. A Sub NMFC of X. It has a NMFC Description of TRANSMISSIONS/CLUTCHES/PARTS,NOI. 3040-01-391-9804 is rated as class 85 when transported by Less-Than Truckload (LTL) freight. 3040-01-391-9804 is rated as class 85 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 64340 which rates the freight between FCL and LCL. 3040-01-391-9804 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-391-9804 is not classified as a special type of cargo when transported by water. 3040-01-391-9804 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-391-9804
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
- Storage Environment
- Unheated General Purpose
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- PPP-C-795, Cellular Plastic Film Cushioning; or A-A-3129, Open Cell Plastic Cushioning; or PPP-C-1797, Polypropylene Foam Cushioning; or A-A-59136, Polyethylene Foam Cushioning
- --
- ASTM-D5118, Type CF, Class Domestic, Corrugated Fiberboard Box
- Open for inspection or use only
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement