Premium Information is available for this item - Upgrade for $1 a day
3040-01-378-3055
Shouldered Shaft
3040013783055 013783055 02907 PART NO 16712 B02907 16712 02907
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
1
Marketplace 3040-01-378-3055
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-378-3055 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-378-3055 RQST NE Updated Every Day 3040-01-378-3055 RQST
7610-27-020-4917 5+ https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-378-3055 Shouldered Shaft 3040013783055
Book 7610270204917 270204917,7610-TJ1-02907 Book 7610270204917 270204917,7610-TJ1-02907 7610-27-020-
012193968,02907,2907 -4917Book7610270204917 270204917 7610-TJ1-02907 https Updated Every Day 8410-17
101A5-02907 An item designed to transmit manual, rotary or https//www.nsnlookup.com /fsg-53/fsc-5320
-378-3055 Shouldered Shaft 3040013783055 013783055 -27-020-4917Book7610270204917 2702049177610-TJ1-02907
) https//www.nsnlookup.com /fsg-53/fsc-5355/uk 5355-99-622-9576 Knob 5355996229576 996229576,101A5-02907
101A5-02907 An item designed to transmit manual, rotary or https//www.nsnlookup.com /fsg-53/fsc-5320
https//www.nsnlookup.com /fsg-53/fsc-5330/us 5330 Book 7610270204917 270204917,7610-TJ1-02907 https/
Rod Seal 5330012193968 012193968,02907,2907 Book 7610270204917 270204917,7610-TJ1-02907 how to enable
Restrictions 3040-01-378-3055
3040-01-378-3055 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-378-3055
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-378-3055
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- GTHD
Approved Sources 3040-01-378-3055
- Part Number
- Manufacturer
- Status
- 02907 PART NO 16712
- Manufacturer
- 98991 - Worcester Controls Corp (Active)
- Primary Buy
- Primary Buy
- B02907
- 98991 - Worcester Controls Corp (Active)
- Secondary Buy
- Secondary Buy
- 16712
- 98991 - Worcester Controls Corp (Active)
- Secondary Buy
- Secondary Buy
- 02907
- 98991 - Worcester Controls Corp (Active)
- Informational Drawing
- Informational Drawing
Weapon Systems (WSDC) 3040-01-378-3055
DLA Procurement Analysis 3040-01-378-3055
Management Data 3040-01-378-3055
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-378-3055
Freight Information 3040-01-378-3055
3040-01-378-3055 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-378-3055 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-378-3055 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-378-3055 is not classified as a special type of cargo when transported by water. 3040-01-378-3055 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-378-3055
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 9.0" H x -- W x -- L
- --
- --
- --
- Any Suitable Process
- 9.0" H x -- W x -- L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- Vendor's Setup or Folding Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Contracting Technical Data File (CTDF) 3040-01-378-3055 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- R
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: