Premium Information is available for this item - Upgrade for $1 a day
3040-01-375-7292
Shouldered Shaft
3040013757292 013757292 13233
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
3
Marketplace 3040-01-375-7292
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-375-7292 5+ Documents (More...)
-00-554-6848 96906 MS51961-35 300 42 https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-375-7292 Shouldered
Shaft 3040013757292 013757292 CAGEC PART NUMBER 300 38 3040-01-374-7871 0EJ14 13252 300 38 3040-01-375
0EJ14 13233 300 39 3120-01-376-6721 0EJ14 81608 300 40 3120 https//www.nsnlookup.com /equipment-intelligence
/fmtv/technical-manual TM-9-2320-366-24P-2 MTV Parts Manual M1083 Series - Volume 2 Page 472 3040-01-375-7292
0EJ14 13233 300 39 3120-01-376-6721 0EJ14 81608 300 40 3120-01-374-7727 0EJ14 13288 300 41 3110
3040-01-375-7292 300 38 0EJ14 13235 3020-01-374-3039 300 50 0EJ14 13247 3950-01-413-3666 303 56 0EJ14
3040-01-375-7292 300 38 0EJ14 13235 3020-01-374-3039 300 50 0EJ14 13247 3950-01-413-3666 303 56 0EJ14
Support 3950014133666 014133666,13247 M1083 Series - Volume 2 Page 472 3020-01-374-3038 300 48 0EJ14 13233
Restrictions 3040-01-375-7292
3040-01-375-7292 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-375-7292
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-375-7292
- US Army (A920)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- A181
- Supplementary Receivers:
- AZ
Approved Sources 3040-01-375-7292
- Part Number
- Manufacturer
- Status
- 13233
- Manufacturer
- 0EJ14 - Dp Manufacturing Inc. (Active)
- Primary Buy
- Primary Buy
- 13233
- 58864 - Dp Mfg Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3040-01-375-7292
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Steel
- First End Style [AAGZ]
- Circular Grooved
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- Circular Grooved
- Second End Groove Diameter [AAHX]
- 3.3750 Inches Nominal
- Largest Step Diameter [CSPY]
- 3.3750 Inches Nominal
- Overall Length [ABHP]
- 19.0313 Inches Nominal
- Step Quantity [ATPC]
- 8
- Special Features [FEAT]
- Has 2 Ea Keyways Off Center 180 Degrees Of Other;Hole Thru End To End
- End Item Identification [AGAV]
- 2320-01-354-4528
Weapon Systems (WSDC) 3040-01-375-7292
DLA Procurement Analysis 3040-01-375-7292
Management Data 3040-01-375-7292
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
NATO Stock Numbers Related to 3040-01-375-7292
Freight Information 3040-01-375-7292
3040-01-375-7292 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-375-7292 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-375-7292 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-375-7292 is not classified as a special type of cargo when transported by water. 3040-01-375-7292 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-375-7292
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 21.0" H x -- W x -- L
- --
- --
- --
- Any Suitable Process
- 21.0" H x -- W x -- L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- PPP-C-795, Cellular Plastic Film Cushioning; or A-A-3129, Open Cell Plastic Cushioning; or PPP-C-1797, Polypropylene Foam Cushioning; or A-A-59136, Polyethylene Foam Cushioning
- --
- Any Suitable Fiber Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 3040-01-375-7292 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: