Premium Information is available for this item - Upgrade for $1 a day
3040-01-372-8553
Shouldered Shaft
3040013728553 013728553 12440542 3HD598 A6210500 14127 2000001 12440452
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
November 2023
18
Marketplace 3040-01-372-8553
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-372-8553 5+ Documents (More...)
. 2530-12-145-5136Hydraulik- Pumpe2530121455136 121455136 2.1201-0200.4 70000002000001 2120102004 2000001
enable JavaScript in your web browser . 6625-66-142-6175Sonobuoy Test Set6625661426175 661426175 2000001
Restrictions 3040-01-372-8553
3040-01-372-8553 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-372-8553
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-372-8553
- US Army (A920)
- Effective Date:
- 1 Jun 2006
- Former MOE Rule:
- A181
- Supplementary Receivers:
- AZ
- US Marine Corps (MC40)
- Effective Date:
- 1 Oct 2009
Approved Sources 3040-01-372-8553
- Part Number
- Manufacturer
- Status
- 12440542
- Manufacturer
- 19207 - U S Army Tank Automotive Command (Active)
- Primary Buy
- Primary Buy
- 3HD598
- 75Q65 - Oshkosh Defense Llc (Active)
- Primary Buy
- Primary Buy
- A6210500
- 0CHW9 - Bombardier Inc (Active)
- Secondary Buy
- Secondary Buy
- 14127
- 31902 - Vse Corporation (Active)
- Secondary Buy
- Secondary Buy
- 3HD598
- 45152 - Oshkosh Corp (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 2000001
- 0PZP2 - Steeltech Mfg Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 12440452
- 0PZP2 - Steeltech Mfg Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 12440542
- 0PZP2 - Steeltech Mfg Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3040-01-372-8553
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Steel
- First End Style [AAGZ]
- Plain
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- Threaded Cross Drilled (Thru Hole)
- Overall Length [ABHP]
- 8.4420 Inches Nominal
- Step Quantity [ATPC]
- 2
- Special Features [FEAT]
- First End Has Washer Welded To End
- End Item Identification [AGAV]
- 3990-01-307-7676 Pls Flatrack
- Part Name Assigned By Controlling Agency [CXCY]
- Shaft-Roller
Weapon Systems (WSDC) 3040-01-372-8553
DLA Procurement Analysis 3040-01-372-8553
- Last Stock Position:
- 194 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3040-01-372-8553
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Oct 2022
- Department of the Navy (DN)
- EA
- Subscribe
- 1
- EA
- Oct 2021
- US Marine Corps (DM)
- EA
- Subscribe
- 1
- EA
- Jul 2021
- Department of the Navy (DN)
- EA
- Subscribe
- 1
- EA
- Oct 2020
- Defense Logistics Agency (DS)
- EA
- Subscribe
- 1
- EA
- Oct 2019
- Department of the Army (DA)
- EA
- Subscribe
- 1
- EA
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 2
- Non-Critical Repair Part
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
- Physical Category:
- 1
- Bin
NATO Stock Numbers Related to 3040-01-372-8553
Freight Information 3040-01-372-8553
3040-01-372-8553 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-372-8553 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-372-8553 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-372-8553 is not classified as a special type of cargo when transported by water. 3040-01-372-8553 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-372-8553
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 10.0" H x -- W x -- L
- --
- --
- Preservative Coating Only
- Any Suitable Process
- 10.0" H x -- W x -- L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- Vendor's Protective Grease or Oil Coating
- MIL-PRF-121, Greaseproof, Waterproof Barrier
- PPP-C-795, Cellular Plastic Film Cushioning; or A-A-3129, Open Cell Plastic Cushioning; or PPP-C-1797, Polypropylene Foam Cushioning; or A-A-59136, Polyethylene Foam Cushioning
- --
- Vendor's Fiberboard Box
- No special marking
- MIL-PRF-121, Greaseproof, Waterproof Barrier
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Procurement History 3040-01-372-8553 6 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE7L323V6906
- 19 Jul 2023
- Subscribe
- 18
- Subscribe
- Subscribe
- Subscribe
- SPE7L023V1167
- 18 Jan 2023
- Subscribe
- 94
- Subscribe
- Subscribe
- Subscribe
- SPE7L322V9897
- 05 May 2022
- Subscribe
- 74
- Subscribe
- Subscribe
- Subscribe
- SPE7L316M2426
- 11 Jan 2016
- Subscribe
- 326
- Subscribe
- Subscribe
- Subscribe
- SPE7L315V9640
- 08 Jun 2015
- Subscribe
- 474
- Subscribe
- Subscribe
- Subscribe
- SPM7L413V3143
- 06 Mar 2013
- Subscribe
- 262
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 3040-01-372-8553 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Y
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: