Premium Information is available for this item - Upgrade for $1 a day
3040-01-372-1436
Shouldered Shaft
3040013721436 013721436 534395 ITEM 534395-01 534395-01
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
7
Marketplace 3040-01-372-1436
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-372-1436 5+ Documents (More...)
RQST NE Updated Every Day 3040-01-372-1436 RQST Updated Every Day 3040-01-372-1436 RQST NE Related Documents
3040-01-372-1436 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-372-1436
534395-01 A shaft having two or more different https//www.nsnlookup.com /fsg-30/fsc-3040/it 3040-
534395-01 A shaft having two or more different diameters (greater https//www.nsnlookup.com /fsg-
greater than 0.031 inches ( ITEM 534395-01 534395-01 A shaft having two or more different ITEM 534395
534395-01 A shaft having two or more different -01 534395-01 A shaft having two or more different
A Crimpare Is 5940151673298 151673298 534395-01 A shaft having two or more different diameters (greater
than 0.031 inches ( A Crimpare 534395-01 A shaft having two or more different https//www.nsnlookup.com
A Crimpare Is 5940151673298 151673298 -01 534395-01 A shaft having two or more different diameters (greater
enable JavaScript in your web browser . 3040-99-556 https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-372-1436
Restrictions 3040-01-372-1436
3040-01-372-1436 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-372-1436
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-372-1436
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
- Brazil (YA01)
- Effective Date:
- 1 Oct 2009
- France (ZF01)
- Effective Date:
- 1 Oct 2002
- Greece (ZU01)
- Effective Date:
- 1 Jun 2006
- Turkey (ZW01)
- Effective Date:
- 1 Nov 1998
Approved Sources 3040-01-372-1436
- Part Number
- Manufacturer
- Status
- 534395 ITEM 534395-01
- Manufacturer
- 71871 - Alfa Laval Inc (Active)
- Primary Buy
- Primary Buy
- 534395-01
- 71871 - Alfa Laval Inc (Active)
- Secondary Buy
- Secondary Buy
- 534395-01
- F1799 - Alfa Laval (Active)
- Secondary Buy
- Secondary Buy
Datasheet 3040-01-372-1436
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Steel
- First End Style [AAGZ]
- Circular Grooved
- First End Groove Width [AAHG]
- 3.0 Millimeters Nominal
- First End Groove Diameter [AAHH]
- 23.5 Millimeters Nominal
- First End Distance From End To Groove [AMCY]
- 85.0 Millimeters Nominal
- First End Diameter [AMDL]
- 25.015 Millimeters Maximum
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- Two Cross Drilled Holes
- Second End Diameter [AMFZ]
- 19.80 Millimeters Maximum
- Second End Hole Diameter [AMGS]
- 5.120 Millimeters Nominal
- Second End Distance From Hole Center To End [AMGT]
- 8.0 Millimeters Nominal
- Second End Distance Between Hole Centers [AMHS]
- 11.5 Millimeters Nominal
- Second End Angle Between Holes [AMHZ]
- 0.0 Degrees Nominal
- Largest Step Diameter [CSPY]
- 24.59 Millimeters Maximum
- Overall Length [ABHP]
- 223.0 Millimeters Nominal
- Step Quantity [ATPC]
- 9
- Special Features [FEAT]
- Has Hole Thru 0Ff Center 6.15 Millimeters
DLA Procurement Analysis 3040-01-372-1436
Management Data 3040-01-372-1436
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-372-1436
Freight Information 3040-01-372-1436
3040-01-372-1436 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-372-1436 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-372-1436 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-372-1436 is not classified as a special type of cargo when transported by water. 3040-01-372-1436 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-372-1436
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- PPP-C-795, Cellular Plastic Film Cushioning; or A-A-3129, Open Cell Plastic Cushioning; or PPP-C-1797, Polypropylene Foam Cushioning; or A-A-59136, Polyethylene Foam Cushioning
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Contracting Technical Data File (CTDF) 3040-01-372-1436 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: