Premium Information is available for this item - Upgrade for $1 a day
3040-01-366-3374
Shouldered Shaft
3040013663374 013663374 TCN445021359-OP TNC445021359-OP30 EHW445X11K-200 ITEM 24
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
7
Marketplace 3040-01-366-3374
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-366-3374 1+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-366-3374 RQST NE Updated Every Day 3040-01-366-3374 RQST
Updated Every Day 3040-01-366-3374 RQST NE Related Documents 3040-01-366-3374 1+ Documents ( More...
Restrictions 3040-01-366-3374
3040-01-366-3374 is a Shouldered Shaft This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-366-3374
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-366-3374
- US Navy (N9BC)
- Effective Date:
- 1 Aug 2006
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
Approved Sources 3040-01-366-3374
- Part Number
- Manufacturer
- Status
- TNC445021359-OP30
- Manufacturer
- S4599 - Kone Oyj Hyvinkaan Tehtaat (Replaced)
- Original Design
- Original Design
- TCN445021359-OP
- A029G - Kone Industrial Oy (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- EHW445X11K-200 ITEM 24
- A029G - Kone Industrial Oy (Active)
- Secondary Buy
- Secondary Buy
- EHW445X11K-200 ITEM 24
- S4599 - Kone Oyj Hyvinkaan Tehtaat (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- TCN445021359-OP
- S4599 - Kone Oyj Hyvinkaan Tehtaat (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- TNC445021359-OP30
- A029G - Kone Industrial Oy (Active)
- Advisory Reference
- Advisory Reference
DLA Procurement Analysis 3040-01-366-3374
Management Data 3040-01-366-3374
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-366-3374
Freight Information 3040-01-366-3374
3040-01-366-3374 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-366-3374 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-366-3374 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-366-3374 is not classified as a special type of cargo when transported by water. 3040-01-366-3374 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-01-366-3374 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: