Premium Information is available for this item - Upgrade for $1 a day
3040-01-361-8197
Shouldered Axle
3040013618197 013618197 06-0037 1676AS303-1 1676AS303
An axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Axle
May 2023
5
Marketplace 3040-01-361-8197
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-361-8197 1+ Documents (More...)
3040-01-361-8197 1+ Documents ( More... ) https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-361-8197
RQST Updated Every Day 3040-01-361-8197 RQST NE Related Documents 3040-01-361-8197 1+ Documents
Restrictions 3040-01-361-8197
3040-01-361-8197 is a Shouldered Axle that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 3040-01-361-8197
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- KE
Approved Sources 3040-01-361-8197
- Part Number
- Manufacturer
- Status
- 06-0037
- Manufacturer
- 62589 - Trailer Component Manufacturing Inc. (Active)
- Primary Buy
- Primary Buy
- 1676AS303-1
- 30003 - Naval Air Systems Command Managed (Active)
- Secondary Buy
- Secondary Buy
- 1676AS303
- 30003 - Naval Air Systems Command Managed (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-361-8197
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Identical
- First End Diameter [AMDL]
- 1.2495 Inches Minimum And 1.2500 Inches Maximum
- First End Keyway Width [AMCZ]
- 0.1719 Inches Nominal
- First End External Keyway Length [AMDE]
- 0.125 Inches Nominal
- First End External Thread Length [AMEA]
- 0.750 Inches Minimum And 0.797 Inches Maximum
- First End Style [AAGZ]
- Externally Threaded And Flat Keyway
- Material [MATT]
- Steel
- Largest Step Diameter [CSPY]
- 2.125 Inches Nominal
- Second End External Keyway Length [AMFS]
- 0.125 Inches Nominal
- Second End External Thread Length [AMHA]
- 0.750 Inches Minimum And 0.797 Inches Maximum
- Second End Diameter [AMFZ]
- 1.2495 Inches Minimum And 1.2500 Inches Maximum
- Second End Keyway Width [AMFR]
- 0.1719 Inches Nominal
- Overall Length [ABHP]
- 67.188 Inches Nominal
- Step Quantity [ATPC]
- 8
DLA Procurement Analysis 3040-01-361-8197
Management Data 3040-01-361-8197
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-361-8197
Freight Information 3040-01-361-8197
3040-01-361-8197 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 132330. A Sub NMFC of X. It has a NMFC Description of TRANSMISSIONS/CLUTCHES/PARTS,NOI. 3040-01-361-8197 is rated as class 85 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 64340 which rates the freight between FCL and LCL. 3040-01-361-8197 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-361-8197 is not classified as a special type of cargo when transported by water. 3040-01-361-8197 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-361-8197
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 70.0" H x 5.0" W x 5.0" L
- --
- --
- Preservative Coating Only
- Any Suitable Process
- 70.0" H x 5.0" W x 5.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- Vendor's Protective Grease or Oil Coating
- MIL-PRF-121, Type I, Medium Duty, Greaseproof, Waterproof Barrier
- --
- --
- ASTM-D5118, Type CF, Class Domestic, Double Wall, Corrugated Fiberboard Box
- No special marking
- MIL-PRF-121, Type I, Medium Duty, Greaseproof, Waterproof Barrier
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 3040-01-361-8197 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: