Premium Information is available for this item - Upgrade for $1 a day
3040-01-348-8024
Shouldered Shaft
3040013488024 013488024 5-227 ITEM 15 5-39MIL1-0803 5-39MIL1-0803-15 5-227
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
3
Marketplace 3040-01-348-8024
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-348-8024 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-348-8024 RQST NE Updated Every Day 3040-01-348-8024 RQST
Updated Every Day 3040-01-348-8024 RQST NE Related Documents 3040-01-348-8024 5+ Documents ( More...
ITEM 7 5-39MIL1-0803 5-39MIL1 1-0803-7 5-227 A gear sector with complements of worm wheel teeth.
https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-348-8024 Shouldered Shaft 3040013488024 013488024
/www.nsnlookup.com /fsg-48/fsc-4820/us 4820-01-348-4464 Valve Gear Operator 4820013484464013484464 5-227
30/fsc-3020/us 3020-01-349-7420 Worm Gear 3020013497420 013497420 5-39MIL1-0803-5 5-39MIL 1-0803-5 5-227
ITEM 5 5-39MIL1-0803 5-39MIL1-0803-5 5-39MIL 1-0803-5 5-227 A gear with teeth on its outer surface in
https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-348-8024 Shouldered Shaft 3040013488024 013488024
ITEM 2 5-39MIL1-0803 5-39MIL1-0803-2 5-227 An item designed to enclose and support the internalpart(
ITEM 5 5-39MIL1-0803 5-39MIL1-0803-5 5-39MIL 1-0803-5 5-227 A gear with teeth on its outer surface in
Restrictions 3040-01-348-8024
3040-01-348-8024 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-348-8024
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-348-8024
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
Approved Sources 3040-01-348-8024
- Part Number
- Manufacturer
- Status
- 5-39MIL1-0803-15
- Manufacturer
- 59309 - Mcc Holdings, Inc. (Obsolete)
- Original Design
- Original Design
- 5-227 ITEM 15 5-39MIL1-0803
- 0AS04 - Duragear Limited (Active)
- Secondary Buy
- Secondary Buy
- 5-39MIL1-0803-15
- 0AS04 - Duragear Limited (Active)
- Secondary Buy
- Secondary Buy
- 5-227
- 67266 - Mcc Holdings, Inc. (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-348-8024
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Steel Comp 304
- First End Style [AAGZ]
- Plain
- First End Diameter [AMDL]
- 0.7500 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- External Threaded
- Second End Diameter [AMFZ]
- 0.5000 Inches Nominal
- Second End External Thread Length [AMHA]
- 0.562 Inches Nominal
- Overall Length [ABHP]
- 8.750 Inches Nominal
Weapon Systems (WSDC) 3040-01-348-8024
DLA Procurement Analysis 3040-01-348-8024
Management Data 3040-01-348-8024
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-348-8024
Freight Information 3040-01-348-8024
3040-01-348-8024 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-348-8024 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-348-8024 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-348-8024 is not classified as a special type of cargo when transported by water. 3040-01-348-8024 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-348-8024
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Contracting Technical Data File (CTDF) 3040-01-348-8024 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: