Premium Information is available for this item - Upgrade for $1 a day
3040-01-348-4403
Shouldered Shaft
3040013484403 013484403 3C3719P30 3C3719
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
1
Marketplace 3040-01-348-4403
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-348-4403 5+ Documents (More...)
Shouldered Shaft 3040013484403 013484403 3040-01-348-4403 3040013484403 013484403 is a shaft having
-70 3C3719 A length of tubing, straight, or prebent to a predetermined angle, with added component(s
-290 3C3719 A length of tubing, straight, or prebent to a predetermined angle, with added component(
-70 3C3719 A length of tubing, straight, or prebent to a predetermined angle, with added component(s
-290 3C3719 A length of tubing, straight, or prebent to a predetermined angle, with added component(
-70 3C3719 A length of tubing, straight, or prebent to a predetermined angle, with added component(s
-290 3C3719 A length of tubing, straight, or prebent to a predetermined angle, with added component(
-70 3C3719 A length of tubing, straight, or prebent to a predetermined angle, with added component(s
-290 3C3719 A length of tubing, straight, or prebent to a predetermined angle, with added component(
Restrictions 3040-01-348-4403
3040-01-348-4403 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-348-4403
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-348-4403
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- KE
Approved Sources 3040-01-348-4403
- Part Number
- Manufacturer
- Status
- 3C3719P30
- Manufacturer
- 07482 - General Electric Company (Active)
- Primary Buy
- Primary Buy
- 3C3719
- 07482 - General Electric Company (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-348-4403
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.6225 Inches Minimum And 0.6230 Inches Maximum
- First End Style [AAGZ]
- Plain
- Material [MATT]
- Steel Corrosion Resisting
- Largest Step Diameter [CSPY]
- 1.000 Inches Nominal
- Second End Distance From End To Groove [AMFQ]
- 0.1000 Inches Nominal
- Second End Diameter [AMFZ]
- 0.9980 Inches Minimum And 1.0000 Inches Maximum
- Second End Style [AAHP]
- Circular Grooved
- Second End Groove Diameter [AAHX]
- 0.9370 Inches Minimum And 0.9430 Inches Maximum
- Second End Groove Width [AAHW]
- 0.0460 Inches Minimum And 0.0490 Inches Maximum
- Overall Length [ABHP]
- 2.460 Inches Nominal
- Step Quantity [ATPC]
- 3
DLA Procurement Analysis 3040-01-348-4403
Management Data 3040-01-348-4403
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3040-01-348-4403
Freight Information 3040-01-348-4403
3040-01-348-4403 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-348-4403 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-348-4403 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-348-4403 is not classified as a special type of cargo when transported by water. 3040-01-348-4403 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-348-4403
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 3040-01-348-4403 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- T
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: