Premium Information is available for this item - Upgrade for $1 a day
3040-01-348-1773
Shouldered Shaft
3040013481773 013481773 123-4775356 ITEM 4 123-4775356 ITEM 4L1
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
8
Marketplace 3040-01-348-1773
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-348-1773 5+ Documents (More...)
RQST NE Updated Every Day 3040-01-348-1773 RQST Updated Every Day 3040-01-348-1773 RQST NE Related Documents
3040-01-348-1773 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-348-1773
123-4775356 ITEM 4L1 A shaft having two or more different diameters (greater than 0.031 inches
https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-348-1773 Shouldered Shaft 3040013481773 013481773
Shouldered Shaft 3040013481773 013481773 for $1 a day Upgrade your Account Upgrade 3040-01-348-
1773Shouldered Shaft3040013481773 013481773 123-4775356 ITEM 4 123-4775356 ITEM 4L1 A shaft having two
ITEM 4 123-4775356 https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-348-1773 Shouldered
Shaft 3040013481773 013481773 ITEM 4 123-4775356 ITEM 4L1 A shaft having two or more different diameters
Shouldered Shaft 3040013481773 013481773 ITEM 4 123-4775356 ITEM 4L1 A shaft having two or more
Restrictions 3040-01-348-1773
IUID Required
3040-01-348-1773 is a Shouldered Shaft that is specifically designed to be or selected as being nuclear hard. In addition it has other critical features such as tolerance, fit restrictions or application.The DCMO has forced the Demilization requirements for this item as the ICP has not collaborated. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-348-1773
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-348-1773
- US Navy (N1H5)
- Effective Date:
- 1 Apr 1991
- Supplementary Collaborators:
- JB
- Supplementary Receivers:
- GG
Approved Sources 3040-01-348-1773
- Part Number
- Manufacturer
- Status
- 123-4775356 ITEM 4
- Manufacturer
- 80064 - Naval Ship Systems Command (Active)
- Incomplete Reference
- Incomplete Reference
- 123-4775356 ITEM 4L1
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
Datasheet 3040-01-348-1773
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Item Identification [AGAV]
- 25In Hatch,Lower Bridge Access
- Criticality Code Justification [CRTL]
- Zzzy
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.7490 Inches Minimum And 0.7500 Inches Maximum
- First End External Thread Length [AMEA]
- 0.9500 Inches Nominal
- First End Style [AAGZ]
- External Threaded
- Material Document And Classification [MDCL]
- Qq-N-281,Cl A,Form 1 Fed Spec Single Material Response
- Material [MATT]
- Nickel Alloy 400
- Largest Step Diameter [CSPY]
- 2.000 Inches Nominal
- Reference Number Differentiating Characteristics [ZZZY]
- Material Controlled Iaw Navsea 0948-Lp-045-7010 Material Control Standard For Level I Items
- Second End External Thread Length [AMHA]
- 0.8750 Inches Nominal
- Second End Diameter [AMFZ]
- 0.7490 Inches Minimum And 0.7500 Inches Maximum
- Second End Style [AAHP]
- External Threaded
- Overall Length [ABHP]
- 10.120 Inches Nominal
- Step Quantity [ATPC]
- 9
DLA Procurement Analysis 3040-01-348-1773
Management Data 3040-01-348-1773
Navy
- Cognizance:
- 1H
- Consumable material assigned to NAVICP MECH for inventory management
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- L1
- An item that supports either a SUBSAFE or Level 1 system that has undergone the extreme material control and quality assurance techniques that provide objective evidence of its acceptance for its appropriate application. Each item has certification papers (or special markings that provide traceability to the certification) that pedigree its material and physical properties, provide traceability, to manufacturer, contract list and lot, and document the quality assurance system and test requirements applied to the item.
- Issue, Repair, Requisition Restriction Code:
- 00
- No Restriction
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
Similar Supply Items to 3040-01-348-1773
Freight Information 3040-01-348-1773
3040-01-348-1773 has freight characteristics managed by the Food and Drug Administration (FDA).It has a National Motor Freight Classification (NMFC) of 129920. A Sub NMFC of X. It has a NMFC Description of SHAFTS/SHAFTING,FLEX NOI STL. 3040-01-348-1773 is rated as class 85 when transported by Less-Than Truckload (LTL) freight. 3040-01-348-1773 is rated as class 85 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-348-1773 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-348-1773 is not classified as a special type of cargo when transported by water. 3040-01-348-1773 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-348-1773
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
- Storage Environment
- Unheated General Purpose
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 8.0" H x 8.0" W x 8.0" L
- --
- --
- --
- Any Suitable Process
- 8.0" H x 8.0" W x 8.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- MIL-P-130, Laminated and Creped Wrapping Paper
- --
- --
- ASTM-D5118, Type CF, Class Weather-Resistant, Corrugated Fiberboard Box
- Open for inspection or use only
- MIL-P-130, Laminated and Creped Wrapping Paper
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement