Premium Information is available for this item - Upgrade for $1 a day
3040-01-347-2834
Shouldered Shaft
3040013472834 013472834 DAA3255D131-001 DAA3255D131
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
January 2023
2
Marketplace 3040-01-347-2834
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-347-2834 4+ Documents (More...)
3040-01-347-2834 3+ Documents ( More... ) https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-347-2834
/fsg-30/fsc-3040/us 3040-01-347-2834 3040-01-347-2834 RQST NE Restrictions 3040-01-347-2834 DEMIL: A
Plate 5340013681743 013681743 -01-370-9939 Aircraft Torque Tube Assembly 1680013709939 Shaft P/N Daa3255d131
Restrictions 3040-01-347-2834
3040-01-347-2834 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-347-2834
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-347-2834
- US Air Force (FNN5)
- Effective Date:
- 1 Jul 2003
- Former MOE Rule:
- FXAX
Approved Sources 3040-01-347-2834
- Part Number
- Manufacturer
- Status
- DAA3255D131-001
- Manufacturer
- 1W025 - Northrop Grumman Systems Corp (Active)
- Primary Buy
- Primary Buy
- DAA3255D131-001
- 76823 - Northrop Grumman Systems Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- DAA3255D131
- 76823 - Northrop Grumman Systems Corporation (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-347-2834
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.9990 Inches Minimum And 0.9995 Inches Maximum
- First End Style [AAGZ]
- Plain
- Material [MATT]
- Steel Comp 4340
- Largest Step Diameter [CSPY]
- 1.750 Inches Nominal
- Second End Distance From Hole Center To End [AMGT]
- 0.223 Inches Nominal
- Second End External Thread Length [AMHA]
- 0.607 Inches Nominal
- Second End Diameter [AMFZ]
- 0.5000 Inches Nominal
- Second End Style [AAHP]
- Cross Drilled And Externally Threaded
- Second End Hole Diameter [AMGS]
- 0.1060 Inches Minimum And 0.1160 Inches Maximum
- Overall Length [ABHP]
- 18.724 Inches Nominal
- Step Quantity [ATPC]
- 7
Management Data 3040-01-347-2834
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Nov 2009
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
Air Force
- Budget:
- S
- 57X3010 - Aircraft Replenishment Spares
- Aggregation Code:
- BQ
- B-2 TSSP, NORTHROP GRUMMAN
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3040-01-347-2834
Freight Information 3040-01-347-2834
3040-01-347-2834 has freight characteristics.. 3040-01-347-2834 has a variance between NMFC and UFC when transported by rail and the description should be consulted.
Packaging Data 3040-01-347-2834
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- Vendor's Protective Grease or Oil Coating
- --
- --
- --
- Any Suitable Fiber Box
- --
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box