Premium Information is available for this item - Upgrade for $1 a day
3040-01-343-8489
Shouldered Shaft
3040013438489 013438489 217085-2 217085
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
1
Marketplace 3040-01-343-8489
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-343-8489 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-343-8489 RQST NE Updated Every Day 3040-01-343-8489 RQST
Updated Every Day 3040-01-343-8489 RQST NE Related Documents 3040-01-343-8489 5+ Documents ( More...
www.nsnlookup.com /fsg-53/fsc-5315/fr 5315-14-401-1315 Headed Straight Pin 5315144011315144011315 217085
Upgrade your Account Upgrade 2915-01-207-8717Rotor And Shaft Assembly2915012078717 012078717 217085
Shouldered Shaft 3040013438489 013438489 for $1 a day Upgrade your Account Upgrade 3040-01-343-
8489Shouldered Shaft3040013438489 013438489 217085 -2 217085 A shaft having two or more different diameters
https https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-343-8489 Shouldered Shaft 3040013438489 013438489
for $1 a day Upgrade your Account Upgrade 3040-01-343-8489Shouldered Shaft3040013438489 013438489 217085
53/fsc-5315/fr 5315-14-401-1315 Headed Straight Pin 5315144011315 144011315 5315013418764013418764 217085
-14-279-4827 Dust And Moisture Seal Protective Cap-Plug And Shaft Assembly2915012078717 012078717 217085
Restrictions 3040-01-343-8489
3040-01-343-8489 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-343-8489
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-343-8489
- National Security Agency (DGX1)
- Effective Date:
- 1 Jan 2007
Approved Sources 3040-01-343-8489
- Part Number
- Manufacturer
- Status
- 217085-2
- Manufacturer
- 59875 - Eaton Corp (Active)
- Primary Buy
- Primary Buy
- 217085
- 59875 - Eaton Corp (Active)
- Informational Drawing
- Informational Drawing
DLA Procurement Analysis 3040-01-343-8489
Management Data 3040-01-343-8489
Similar Supply Items to 3040-01-343-8489
Freight Information 3040-01-343-8489
3040-01-343-8489 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-343-8489 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-343-8489 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-343-8489 is not classified as a special type of cargo when transported by water. 3040-01-343-8489 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-01-343-8489 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: