Premium Information is available for this item - Upgrade for $1 a day
3040-01-343-1888
Shouldered Shaft
3040013431888 013431888 84168
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
5
Marketplace 3040-01-343-1888
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-343-1888 5+ Documents (More...)
designed to retain CIRCUIT CARD ASSEMBLY or PRINTED CIRCUIT L 84168-34 84168 -52 84168 A device https
A L 84168-34 84168 -52 84168 https - -09984168 A 84168-34 84168 https/ 84168 A device specifically /
-52 Holder 5998013667899 Holder 5998013667899 -2-10-3-L 84168-34 84168 A Shaft 3040013431888013431888
3040013431888 013431888 https//www.nsnlookup.com /fsg-59/fsc-5998/us 5998-01-366-7899 Electrical Card
Shouldered Shaft 3040013431888 013431888 - https//www.nsnlookup.com -034 24SX-2-10-3-L 84168-34
-34 84168 -52 84168 A device https https//www.nsnlookup.com /fsg-59/fsc-5998/us 5998-01-439-0537 Electrical
-34 84168 -52 84168 A device https https//www.nsnlookup.com /fsg-59/fsc-5998/us 5998-01-418-9175 https
A device specifically designed to retain L 84168-34 84168 -52 84168 https//www.nsnlookup.com /fsg-59
-52 84168 https - -09984168 A 84168-34 84168 https/ 84168 A device specifically /fsg-59/fsc-5998/us 5998
84168-52 84168 5998013317629 -2-10-3 -L 84168- -09984168 A 84168 A 84168-34 84168 https/ 84168 A device
Restrictions 3040-01-343-1888
3040-01-343-1888 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-343-1888
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-343-1888
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- KE
Approved Sources 3040-01-343-1888
- Part Number
- Manufacturer
- Status
- 84168
- Manufacturer
- 09790 - Eaton Aerospace Llc (Active)
- Primary Buy
- Primary Buy
- 84168
- 05228 - Pti Technologies Inc. (Active)
- Secondary Buy
- Secondary Buy
- 84168
- 1PVC5 - Vacco Industries (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3040-01-343-1888
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Steel Corrosion Resisting
- Material Document And Classification [MDCL]
- Ams5659 15-5 Ph Cres Assn Std Single Material Response
- Surface Finish [CSYM]
- 63.0 Microinches
- First End Style [AAGZ]
- Splined (Straight)
- First End Diameter [AMDL]
- 0.1880 Inches Nominal
- First End Spline Length [AMDM]
- 0.2830 Inches Nominal
- First End Spline Minor Diameter [AMDN]
- 0.1390 Inches Nominal
- First End Spline Major Diameter [AMDP]
- 0.1880 Inches Nominal
- First End Spline Quantity [BDSQ]
- 8
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- External Threaded
- Second End Diameter [AMFZ]
- 0.1380 Inches Nominal
- Second End External Thread Length [AMHA]
- 0.2500 Inches Nominal
- Largest Step Diameter [CSPY]
- 0.463 Inches Nominal
- Overall Length [ABHP]
- 3.157 Inches Nominal
- Step Quantity [ATPC]
- 11
Weapon Systems (WSDC) 3040-01-343-1888
DLA Procurement Analysis 3040-01-343-1888
Management Data 3040-01-343-1888
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-343-1888
Freight Information 3040-01-343-1888
3040-01-343-1888 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-343-1888 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-343-1888 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-343-1888 is not classified as a special type of cargo when transported by water. 3040-01-343-1888 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-343-1888
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- Vendor's Protective Grease or Oil Coating
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Contracting Technical Data File (CTDF) 3040-01-343-1888 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: