Premium Information is available for this item - Upgrade for $1 a day
3040-01-342-8698
Shouldered Shaft
3040013428698 013428698 204771
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
2
Marketplace 3040-01-342-8698
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-342-8698 5+ Documents (More...)
Updated Every 15 Minutes 3040-01-342-8698 BUY NE FedMall Updated Every Day 3040-01-342-8698 RQST NE
Updated Every Day 3040-01-342-8698 RQST Updated Every Day 3040-01-342-8698 RQST NE Related Documents
CHARGER,BATTERY 12 EA NS Request Quotation 204771 CHARGER,BATTERY 12 EA NS Request Quotation FedMall
for $1 a day Upgrade your Account Upgrade 3040-01-342-8698Shouldered Shaft3040013428698 013428698 204771
Shouldered Shaft 3040013428698 013428698 for $1 a day Upgrade your Account Upgrade 3040-01-342-
8698Shouldered Shaft3040013428698 013428698 204771 Screw Pitch Gage 5210145117338145117338 in your web
Shouldered Shaft 3040013428698 013428698 Gage5210145117338 145117338 814.NI 3148512047711 204771
Shouldered Shaft 3040013428698 013428698 342-86983040013428698013428698 is a shaft having https
Restrictions 3040-01-342-8698
3040-01-342-8698 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-342-8698
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-342-8698
- US Army (A920)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- A181
Approved Sources 3040-01-342-8698
- Part Number
- Manufacturer
- Status
- 204771
- Manufacturer
- 98810 - Aerosonic Llc (Active)
- Primary Buy
- Primary Buy
Datasheet 3040-01-342-8698
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Item Identification [AGAV]
- 6610-01-164-8092
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.1195 Inches Minimum And 0.1200 Inches Maximum
- First End Style [AAGZ]
- Plain
- Material Document And Classification [MDCL]
- Qq-A-225/6 Mil Spec Single Material Response
- Material [MATT]
- Aluminum
- Largest Step Diameter [CSPY]
- 0.312 Inches Nominal
- Second End Distance From Hole Center To End [AMGT]
- 0.2150 Inches Minimum And 0.2210 Inches Maximum
- Second End Angle Between Holes [AMHZ]
- 90.0 Degrees Nominal
- Second End Diameter [AMFZ]
- 0.1850 Inches Minimum And 0.1900 Inches Maximum
- Second End Style [AAHP]
- Two Cross Drilled Holes
- Second End Hole Diameter [AMGS]
- 0.0780 Inches Minimum And 0.0790 Inches Maximum
- Overall Length [ABHP]
- 1.152 Inches Minimum And 1.160 Inches Maximum
- Special Features [FEAT]
- Identical Holes On Both Ends With 0.1195In. Min 0.1200In. Max Dia; Drilled No.50 (0.070) Dia Thru Tap No.2-64 Unf-2B Thru Two Holes After Anodized; Nha Is 6680-01-336-4083
- Step Quantity [ATPC]
- 4
DLA Procurement Analysis 3040-01-342-8698
Management Data 3040-01-342-8698
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Similar Supply Items to 3040-01-342-8698
Freight Information 3040-01-342-8698
3040-01-342-8698 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-342-8698 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-342-8698 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-342-8698 is not classified as a special type of cargo when transported by water. 3040-01-342-8698 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-01-342-8698 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: