Premium Information is available for this item - Upgrade for $1 a day
3040-01-332-1617
Shouldered Shaft
3040013321617 013321617 79422 A001 4626AA
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
June 2023
3
Marketplace 3040-01-332-1617
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-332-1617 5+ Documents (More...)
(Identification) 1/2 NSN 3040-01-332-1617 (Identification) 2/2 - - 1.
Day 3040-01-332-1617 RQST NE Updated Every Day 3040-01-332-1617 RQST Updated Every Day 3040-01-332-1617
3040-01-332-1617 Shouldered Shaft 3040013321617 013321617 -771-9453 Part NumberManufacturerStatusRL/
79422 https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-332-1617 Shouldered Shaft 3040013321617 013321617
79422 A001 4626AA https//www.nsnlookup.com https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-332-
1617 Shouldered Shaft 3040013321617 013321617 day Upgrade your Account Upgrade 3040-01-332-1617Shouldered
Generator 6115013291671 6115-01 Shaft3040013321617 https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-332-1617
Shouldered Shaft 3040013321617 013321617 day Upgrade your Account Upgrade 3040-01-332-1617Shouldered
Shouldered Shaft 3040013321617 013321617 332-1617 Shouldered Shaft 3040013321617013321617 https
JavaScript in your web browser . 5998-99-771 -9453Circuit Card Assembly5998997719453 997719453 RL/79422
Restrictions 3040-01-332-1617
3040-01-332-1617 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-332-1617
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-332-1617
- US Army (A920)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- A181
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Supplementary Collaborators:
- HD
Approved Sources 3040-01-332-1617
- Part Number
- Manufacturer
- Status
- 79422
- Manufacturer
- 24975 - Prestolite Electric Inc (Active)
- Primary Buy
- Primary Buy
- 79422
- 35510 - Prestolite Electric Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- A001 4626AA
- 35510 - Prestolite Electric Inc (Replaced)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-332-1617
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- First End Style [AAGZ]
- Plain
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- External Threaded
- Step Quantity [ATPC]
- 7
- End Item Identification [AGAV]
- Prestolite Electric Inc. Alternator Model A001 4626Aa
DLA Procurement Analysis 3040-01-332-1617
Management Data 3040-01-332-1617
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-332-1617
Freight Information 3040-01-332-1617
3040-01-332-1617 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-332-1617 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-332-1617 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-332-1617 is not classified as a special type of cargo when transported by water. 3040-01-332-1617 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-332-1617
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- MIL-PRF-121, Type II, Light Duty, Greaseproof, Waterproof Barrier
- No Requirement
- Not Applicable
- Vendor's Setup or Folding Box
- No special marking
- MIL-PRF-121, Type II, Light Duty, Greaseproof, Waterproof Barrier
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Procurement History 3040-01-332-1617 1 Records
Contracting Technical Data File (CTDF) 3040-01-332-1617 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: