Premium Information is available for this item - Upgrade for $1 a day
3040-01-329-1368
Shouldered Shaft
3040013291368 013291368 1128432 314024 FIND 8 314024
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
1
Marketplace 3040-01-329-1368
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-329-1368 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-329-1368 RQST NE Updated Every Day 3040-01-329-1368 RQST
Updated Every Day 3040-01-329-1368 RQST NE Related Documents 3040-01-329-1368 5+ Documents ( More...
Gasket 5330218680259 218680259,314024 FIND 4 314024 An cylindrical item which accommodates a rope FIND
4 314024 An cylindrical item which accommodates a rope, line, and and the like, and is used on https
An cylindrical item which accommodates a rope, line, and and the like, and is used on FIND 4 314024
www.nsnlookup.com /fsg-53/fsc-5330/us 5330-00-091-4163 Seal 5330000914163 000914163,314024 FIND 4 314024
JavaScript in your web browser . 5340-14 -424-2373Hand Crank5340144242373 144242373314024 FIND 4 314024
An cylindrical item which accommodates a rope, line, and and the like, and is used on FIND 4 314024
how to enable JavaScript in your web browser . 6685-15-142-7550Termocoppia6685151427550 151427550 314024
FIND 4 314024 An cylindrical item which accommodates a rope, line, and and the like, and is used on
Restrictions 3040-01-329-1368
3040-01-329-1368 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-329-1368
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-329-1368
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
Approved Sources 3040-01-329-1368
- Part Number
- Manufacturer
- Status
- 1128432
- Manufacturer
- 34712 - Lake Shore Systems, Inc. (Active)
- Primary Buy
- Primary Buy
- 314024 FIND 8
- 34712 - Lake Shore Systems, Inc. (Active)
- Secondary Buy
- Secondary Buy
- 314024
- 34712 - Lake Shore Systems, Inc. (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-329-1368
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Steel Comp 1045
- Surface Finish [CSYM]
- 125.0 Microinches
- First End Style [AAGZ]
- Plain
- First End Diameter [AMDL]
- 2.0015 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- Plain
- Second End Diameter [AMFZ]
- 2.0030 Inches Nominal
- Largest Step Diameter [CSPY]
- 3.000 Inches Nominal
- Overall Length [ABHP]
- 18.250 Inches Nominal
- Step Quantity [ATPC]
- 4
DLA Procurement Analysis 3040-01-329-1368
Management Data 3040-01-329-1368
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-329-1368
Freight Information 3040-01-329-1368
3040-01-329-1368 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-329-1368 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-329-1368 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-329-1368 is not classified as a special type of cargo when transported by water. 3040-01-329-1368 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-01-329-1368 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: