Premium Information is available for this item - Upgrade for $1 a day
3040-01-328-2893
Shouldered Shaft
3040013282893 013282893 319134 FIND 38 1127882 314024 FIND 5 314024
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
3
Marketplace 3040-01-328-2893
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-328-2893 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-328-2893 RQST NE Updated Every Day 3040-01-328-2893 RQST
Updated Every Day 3040-01-328-2893 RQST NE Related Documents 3040-01-328-2893 5+ Documents ( More...
FIND 6 314024 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter
Shouldered Shaft 3040013282893 013282893 FIND 5 314024 A shaft having two or more different diameters
FIND 9 314024 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter
//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-328-2893 Shouldered Shaft 3040013282893 013282893 FIND
FIND 7 314024 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter
Shouldered Shaft 3040013282893 013282893 FIND 5 314024 A shaft having two or more different diameters
https//www.nsnlookup.com /fsg-31/fsc-3110/us 3110-01-331-6369 Bearing Retaining Plate 3110013316369 314024
a day Upgrade your Account Upgrade 3110-01-331-6369Bearing Retaining Plate3110013316369 013316369 314024
Restrictions 3040-01-328-2893
3040-01-328-2893 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-328-2893
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-328-2893
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
Approved Sources 3040-01-328-2893
- Part Number
- Manufacturer
- Status
- 1127882
- Manufacturer
- 34712 - Lake Shore Systems, Inc. (Active)
- Primary Buy
- Primary Buy
- 314024 FIND 5
- 34712 - Lake Shore Systems, Inc. (Active)
- Secondary Buy
- Secondary Buy
- 319134 FIND 38
- 34712 - Lake Shore Systems, Inc. (Active)
- Advisory Reference
- Advisory Reference
- 314024
- 34712 - Lake Shore Systems, Inc. (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-328-2893
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 1.5610 Inches Minimum And 1.5620 Inches Maximum
- First End Keyway Depth [AMDG]
- 0.1880 Inches Nominal
- First End Keyway Width [AMCZ]
- 0.3750 Inches Nominal
- First End External Keyway Length [AMDE]
- 3.1250 Inches Nominal
- First End Style [AAGZ]
- Flat Keyway
- Material [MATT]
- Steel Comp 1045
- Largest Step Diameter [CSPY]
- 2.875 Inches Nominal
- Second End Diameter [AMFZ]
- 1.9980 Inches Minimum And 1.9990 Inches Maximum
- Second End External Keyway Length [AMFS]
- 2.1880 Inches Nominal
- Second End Style [AAHP]
- Flat Keyway
- Second End Keyway Depth [AMFT]
- 0.2500 Inches Nominal
- Second End Keyway Width [AMFR]
- 0.5000 Inches Nominal
- Overall Length [ABHP]
- 31.938 Inches Nominal
- Step Quantity [ATPC]
- 7
DLA Procurement Analysis 3040-01-328-2893
Management Data 3040-01-328-2893
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-328-2893
Freight Information 3040-01-328-2893
3040-01-328-2893 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-328-2893 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-328-2893 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-328-2893 is not classified as a special type of cargo when transported by water. 3040-01-328-2893 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-328-2893
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 35.0" H x 4.0" W x 4.0" L
- --
- --
- Preservative Coating Only
- Any Suitable Process
- 35.0" H x 4.0" W x 4.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- MIL-PRF-16173, Grade 2, Corrosion Preventive, Solvent Cutback, Cold Application, Soft Film
- --
- ASTM-D4727, Fiberboard used as Pads, Cells, Die-cuts or Sleeves
- --
- ASTM-D5118, Type CF, Class Domestic, Double Wall, Corrugated Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 3040-01-328-2893 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: