Premium Information is available for this item - Upgrade for $1 a day
3040-01-327-7765
Remote Control Lever
3040013277765 013277765 1286M44G01 1286M
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL. View more Remote Control Lever
August 2023
3
Marketplace 3040-01-327-7765
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-327-7765 4+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-327-7765 RQST NE Updated Every Day 3040-01-327-7765 RQST
Updated Every Day 3040-01-327-7765 RQST NE Related Documents 3040-01-327-7765 4+ Documents ( More...
Remote Control Lever 3040013277765 013277765 RQST NE Updated Every Day 3040-01-327-7765 RQST https
//www.nsnlookup.com /fsg-53/fsc-5331/pl 5331-43-000-0790 O-Ring 5331430000790430000790,BU-1286M instructions
Request Quotation Subscribe to View Vendor Details https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-327-7765
Remote Control Lever 3040013277765 013277765 -000-0790 Part NumberManufacturerStatusBU-1286M https
Restrictions 3040-01-327-7765
3040-01-327-7765 is a Remote Control Lever that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 3040-01-327-7765
- US Air Force (FXGC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- FXAX
Approved Sources 3040-01-327-7765
- Part Number
- Manufacturer
- Status
- 1286M44G01
- Manufacturer
- 07482 - General Electric Company (Active)
- Primary Buy
- Primary Buy
- 1286M
- 07482 - General Electric Company (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-327-7765
- Characteristic
- Specifications
- FIIG
- Specifications
- A524P0
- Material [MATT]
- Steel
- Style Designator [STYL]
- Offset, One Hole Link End
- Center To Center Distance Between Link And Shaft Holes [BFGW]
- 2.860 Inches Nominal
- Shaft End Thickness [BFGX]
- 0.457 Inches Nominal
- Link End Thickness [BFGY]
- 0.192 Inches Nominal
- Link End Hole Diameter [BFHA]
- 0.500 Inches Nominal
- Bore Type [ASBP]
- Plain Straight
- Bore Diameter [ABXV]
- 0.867 Inches Nominal
- Bore Length [ADGE]
- 0.457 Inches Nominal
Weapon Systems (WSDC) 3040-01-327-7765
DLA Procurement Analysis 3040-01-327-7765
- Last Stock Position:
- 21 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3040-01-327-7765
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 3040-01-327-7765
Freight Information 3040-01-327-7765
3040-01-327-7765 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 132330. A Sub NMFC of X. It has a NMFC Description of TRANSMISSIONS/CLUTCHES/PARTS,NOI. 3040-01-327-7765 is rated as class 85 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 64340 which rates the freight between FCL and LCL. 3040-01-327-7765 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-327-7765 is not classified as a special type of cargo when transported by water. 3040-01-327-7765 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-327-7765
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- No Requirement
- Not Applicable
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Contracting Technical Data File (CTDF) 3040-01-327-7765 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: