Premium Information is available for this item - Upgrade for $1 a day
3040-01-325-8194
Shouldered Shaft
3040013258194 013258194 3C3165P06 363165P06 3C3165
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
November 2023
11
Marketplace 3040-01-325-8194
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-325-8194 4+ Documents (More...)
Shouldered Shaft 3040013258194 013258194 3040-01-325-8194 3040013258194 013258194 is a shaft having
Restrictions 3040-01-325-8194
3040-01-325-8194 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-325-8194
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-325-8194
- US Air Force (FXGC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- FXAX
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- GTKE
- Poland (WP01)
- Effective Date:
- 1 Aug 2007
- Greece (ZU01)
- Effective Date:
- 1 May 2008
Approved Sources 3040-01-325-8194
- Part Number
- Manufacturer
- Status
- 3C3165P06
- Manufacturer
- 5QE71 - Rhinestahl Corporation (Active)
- Primary Buy
- Primary Buy
- 3C3165P06
- 07482 - General Electric Company (Active)
- Secondary Buy
- Secondary Buy
- 363165P06
- 59565 - Quality Mfg Company Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 3C3165P06
- 59565 - Quality Mfg Company Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 3C3165P06
- 26952 - Enerpac Tool Group Corp (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 3C3165
- 07482 - General Electric Company (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-325-8194
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Steel Comp 4340
- First End Style [AAGZ]
- Plain
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- Plain
- Largest Step Diameter [CSPY]
- 1.000 Inches Nominal
- Overall Length [ABHP]
- 15.250 Inches Nominal
- Step Quantity [ATPC]
- 6
- End Item Identification [AGAV]
- 5130-01-139-2214
Weapon Systems (WSDC) 3040-01-325-8194
DLA Procurement Analysis 3040-01-325-8194
- Last Stock Position:
- 30 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3040-01-325-8194
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3040-01-325-8194
Freight Information 3040-01-325-8194
3040-01-325-8194 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-325-8194 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-325-8194 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-325-8194 is not classified as a special type of cargo when transported by water. 3040-01-325-8194 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-325-8194
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 7.5lb to 10lb, all dimensions less than 24"
- 85 to 110G
- MIL-PRF-21260, Engine Oil, Type I, Grades 10, 30 or 50
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 16.0" H x 2.0" W x 2.0" L
- --
- --
- Preservative Coating Only
- Any Suitable Process
- 16.0" H x 2.0" W x 2.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- Vendor's Protective Grease or Oil Coating
- --
- --
- --
- Vendor's Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Procurement History 3040-01-325-8194 7 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE7L321F003K
- 01 Apr 2021
- Subscribe
- 19
- Subscribe
- Subscribe
- Subscribe
- SPE7L321F003K
- 01 Apr 2021
- Subscribe
- 19
- Subscribe
- Subscribe
- Subscribe
- SPE4A113G0002U317
- 12 Apr 2016
- Subscribe
- 22
- Subscribe
- Subscribe
- Subscribe
- SPE4A113G0002U306
- 04 Aug 2014
- Subscribe
- 24
- Subscribe
- Subscribe
- Subscribe
- SPM7L213M4741
- 16 Apr 2013
- Subscribe
- 24
- Subscribe
- Subscribe
- Subscribe
- SPM7L213M4749
- 16 Apr 2013
- Subscribe
- 9
- Subscribe
- Subscribe
- Subscribe
- SPM7L013M4686
- 13 Apr 2013
- Subscribe
- 8
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 3040-01-325-8194 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: