Premium Information is available for this item - Upgrade for $1 a day
3040-01-317-2783
Shouldered Shaft
3040013172783 013172783 122-5486623 PC93 122-5486623
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
2
Marketplace 3040-01-317-2783
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-317-2783 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-317-2783 RQST NE Updated Every Day 3040-01-317-2783 RQST
Updated Every Day 3040-01-317-2783 RQST NE Related Documents 3040-01-317-2783 5+ Documents ( More...
01-317-2784 Shouldered Shaft 3040013172784 013172784 Bushingzsleevezzzzz 3120015621343015621343 122-5486623
$1 a day Upgrade your Account Upgrade 3120-01-555-0166Bushingzsleevezzzzz3120015550166 015550166 122-5486623
www.nsnlookup.com /fsg-31/fsc-3120/us 3120-01-559-5426 Bushingzsleevezzzzz 3120015595426015595426 122-5486623
$1 a day Upgrade your Account Upgrade 3120-01-559-5426Bushingzsleevezzzzz3120015595426 015595426 122-5486623
ITEM 042D4 122-5486623 ITEM 042 A tubular shaped unthreaded item with or without a flange at one end
317-2784 Shouldered Shaft 3040013172784 013172784 5426Bushingzsleevezzzzz3120015595426 015595426 122-5486623
ITEM 75 122-5486623 ITEM 075 122-5486623 ITEM 075D4 122-5486623 ITEM 75D4 An externally threaded fastener
ITEM 042D4 122-5486623 ITEM 042 A tubular shaped unthreaded item with or without a flange at one end
Restrictions 3040-01-317-2783
3040-01-317-2783 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-317-2783
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-317-2783
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
Approved Sources 3040-01-317-2783
- Part Number
- Manufacturer
- Status
- 122-5486623 PC93
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Primary Buy
- Primary Buy
- 122-5486623
- 43689 - Huntington Ingalls Inc (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-317-2783
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.7500 Inches Nominal
- First End Internal Thread Length [AMER]
- 9.2500 Inches Nominal
- First End External Thread Length [AMEA]
- 1.8800 Inches Nominal
- First End Style [AAGZ]
- Externally And Internally Threaded
- Material Document And Classification [MDCL]
- Qq-N-281,Cl A Fed Spec Single Material Response
- Material [MATT]
- Nickel Alloy
- Largest Step Diameter [CSPY]
- 2.0000 Inches Nominal
- Second End Distance From Keyway Center To End [AMFW]
- 1.1900 Inches Nominal
- Second End External Keyway Length [AMFS]
- 0.7780 Inches Nominal
- Second End Diameter [AMFZ]
- 0.9990 Inches Minimum And 1.0000 Inches Maximum
- Second End Style [AAHP]
- Woodruff Keyway And Internally Threaded
- Second End Internal Thread Length [AMHP]
- 0.8800 Inches Nominal
- Second End Keyway Width [AMFR]
- 0.2520 Inches Nominal
- Overall Length [ABHP]
- 11.860 Inches Nominal
- Step Quantity [ATPC]
- 6
- Surface Finish [CSYM]
- 32.0 Microinches
DLA Procurement Analysis 3040-01-317-2783
Management Data 3040-01-317-2783
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-317-2783
Freight Information 3040-01-317-2783
3040-01-317-2783 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-317-2783 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-317-2783 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-317-2783 is not classified as a special type of cargo when transported by water. 3040-01-317-2783 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-317-2783
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- Any Suitable Fiber Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Contracting Technical Data File (CTDF) 3040-01-317-2783 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: