Premium Information is available for this item - Upgrade for $1 a day
3040-01-314-8851
Shouldered Shaft
3040013148851 013148851 JCM-14325-001 JCM-14325
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
2
Marketplace 3040-01-314-8851
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-314-8851 5+ Documents (More...)
(Identification) 1/2 NSN 3040-01-314-8851 (Identification) 2/2 - - 1.
BUY NE FedMall Updated Every Day 3040-01-314-8851 RQST NE Updated Every Day 3040-01-314-8851 RQST
Shouldered Shaft 3040013148851 013148851 $1 a day Upgrade your Account Upgrade 3040-01-314-8851Shouldered
Shaft3040013148851 013148851 JCM-14325 -001 JCM-14325 A shaft having two or more different diameters
Shouldered Shaft 3040013148851 013148851 $1 a day Upgrade your Account Upgrade 3040-01-314-8851Shouldered
Shaft3040013148851 013148851 JCM-14325 -001 JCM-14325 A shaft having two or more different diameters
Shouldered Shaft 3040013148851 013148851 $1 a day Upgrade your Account Upgrade 3040-01-314-8851Shouldered
Shaft3040013148851 013148851 JCM-14325 -001 JCM-14325 A shaft having two or more different diameters
Shouldered Shaft 3040013148851 013148851 $1 a day Upgrade your Account Upgrade 3040-01-314-8851Shouldered
Shaft3040013148851 013148851 JCM-14325 -001 JCM-14325 A shaft having two or more different diameters
Restrictions 3040-01-314-8851
3040-01-314-8851 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-314-8851
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-314-8851
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
Approved Sources 3040-01-314-8851
- Part Number
- Manufacturer
- Status
- JCM-14325-001
- Manufacturer
- 58905 - Strike Weapons And Unmanned Aviation (Active)
- Primary Buy
- Primary Buy
- JCM-14325
- 58905 - Strike Weapons And Unmanned Aviation (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-314-8851
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Steel Corrosion Resisting
- Material Document And Classification [MDCL]
- Qq-S-763,Cl 304,Cond A Fed Spec Single Material Response
- Surface Finish [CSYM]
- 125.0 Microinches
- First End Style [AAGZ]
- External Threaded
- First End Diameter [AMDL]
- 1.0000 Inches Nominal
- First End External Thread Length [AMEA]
- 1.125 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- Cross Drilled And Externally Threaded
- Second End Diameter [AMFZ]
- 0.5000 Inches Nominal
- Second End Hole Diameter [AMGS]
- 0.1090 Inches Nominal
- Second End Distance From Hole Center To End [AMGT]
- 0.3742 Inches Nominal
- Second End External Thread Length [AMHA]
- 0.6850 Inches Nominal
- Second End Hole Depth [AMHD]
- 0.5000 Inches Nominal
- Largest Step Diameter [CSPY]
- 1.250 Inches Nominal
- Overall Length [ABHP]
- 1.250 Inches Nominal
- Step Quantity [ATPC]
- 6
Weapon Systems (WSDC) 3040-01-314-8851
DLA Procurement Analysis 3040-01-314-8851
Management Data 3040-01-314-8851
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-314-8851
Freight Information 3040-01-314-8851
3040-01-314-8851 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-314-8851 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-314-8851 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-314-8851 is not classified as a special type of cargo when transported by water. 3040-01-314-8851 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-01-314-8851 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: