Premium Information is available for this item - Upgrade for $1 a day
3040-01-314-7804
Shouldered Shaft
3040013147804 013147804 18004-7 18004
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
2
Marketplace 3040-01-314-7804
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-314-7804 5+ Documents (More...)
(Identification) 1/2 NSN 3040-01-314-7804 (Identification) 2/2 - - 1.
Quotation FedMall Updated Every 15 Minutes 3040-01-314-7804 BUY NE FedMall Updated Every Day 3040-01
www.nsnlookup.com /fsg-53/fsc-5340/us 5340-00-178-4426 Flush Catch 5340001784426001784426,H2031-7 H2031-7202-18004
Shouldered Shaft 3040013147804 013147804 Restrictions Approved Sources Datasheet Management https
Electrical Insulation Sleeving 5970226162919 0101800 18004 JavaScript https//www.nsnlookup.com /fsg-
RNVC 2 DAC 5 7686-18004- (Active) Primary Buy RNCC 3 RNVC 2 DAC 5 7686-18004-010 -8792 Wire Wound Fixed
-010 - (Active) Primary Buy RNCC 3 RNVC 2 DAC 5 7686-18004 https//www.nsnlookup.com /fsg-39/fsc-3950/
SLIDER ASSEMBLY SLIDER ASSEMBLY 68 EA NS Request Quotation Subscribe to View Vendor Details... 18004
- (Active) Primary Buy RNCC 3 RNVC 2 DAC 5 7686-18004-010 14170 - Hughes Missile Systems Co San Diego
BRAKE BAND AND LINING 99 EA NS Request Quotation Subscribe to View Vendor Details... 18004 BRAKE BAND
Restrictions 3040-01-314-7804
3040-01-314-7804 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-314-7804
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-314-7804
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
Approved Sources 3040-01-314-7804
- Part Number
- Manufacturer
- Status
- 18004-7
- Manufacturer
- 07070 - United States Department Of The Navy (Active)
- Primary Buy
- Primary Buy
- 18004
- 07070 - United States Department Of The Navy (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-314-7804
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Steel Corrosion Resisting
- First End Style [AAGZ]
- Plain
- First End Diameter [AMDL]
- 0.6000 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- Circular Grooved
- Second End Groove Width [AAHW]
- 0.0450 Inches Nominal
- Second End Groove Diameter [AAHX]
- 0.4680 Inches Nominal
- Second End Distance From End To Groove [AMFQ]
- 0.065 Inches Nominal
- Second End Diameter [AMFZ]
- 0.4995 Inches Nominal
- Largest Step Diameter [CSPY]
- 0.600 Inches Nominal
- Overall Length [ABHP]
- 1.300 Inches Nominal
- Step Quantity [ATPC]
- 3
Weapon Systems (WSDC) 3040-01-314-7804
DLA Procurement Analysis 3040-01-314-7804
Management Data 3040-01-314-7804
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3040-01-314-7804
Freight Information 3040-01-314-7804
3040-01-314-7804 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-314-7804 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-314-7804 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-314-7804 is not classified as a special type of cargo when transported by water. 3040-01-314-7804 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-01-314-7804 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: