Premium Information is available for this item - Upgrade for $1 a day
3040-01-313-8754
Shouldered Shaft
3040013138754 013138754 26M68-310-10 26M68-310
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
4
Marketplace 3040-01-313-8754
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-313-8754 5+ Documents (More...)
/fsg-47/fsc-4730/us
-02 26M68-310-2 26M68-310 A gear in the form of a frustum of a cone, with straight, skewed, or curved
-3 26M68-310 A gear in the form of a frustum of a cone, with straight, skewed, or curved -02 26M68
Shouldered Shaft 26M68-310-10RNCC: 5 | RNVC: 9 | DAC: 6 19 Jan 1990 3020-01-313-5485 Spur Gear
4784 Nonmetallic Tubing 59014RNCC: 5 | RNVC: 9 | DAC: 6 24 Feb 2004 5310-01-314-6763 Flat Washer 26M68-310
Shouldered Shaft 26M68-310-10RNCC: https//www.nsnlookup.com /cage At And T Document Development
CAGE 1D309 Page 1 of 1 3040-01-313-8753 Shouldered Shaft 26M68-306-12RNCC: 8754 Shouldered Shaft 26M68-310
Shouldered Shaft 26M68-310-10RNCC: 5 | RNVC: 9 | DAC: 6 19 Jan 1990 3020-01-313-5485 Spur Gear
-02 26M68-310-2 26M68-310 A gear in the form of a frustum of a cone, with straight, skewed, or curved
Bevel Gear 26M68-310-2RNCC: 5 | RNVC: 9 | DAC: E 8 Feb 1990 5996-01-312-6856 Audio Frequency Amplifier
Restrictions 3040-01-313-8754
3040-01-313-8754 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-313-8754
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-313-8754
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HDJB
Approved Sources 3040-01-313-8754
- Part Number
- Manufacturer
- Status
- 26M68-310-10
- Manufacturer
- 96169 - Electric Boat Corporation (Active)
- Primary Buy
- Primary Buy
- 26M68-310-10
- 1D309 - At And T Document Development (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 26M68-310
- 96169 - Electric Boat Corporation (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-313-8754
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Item Identification [AGAV]
- Cable Reel,General Dynmics,Model An/Bqr-15
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.6230 Inches Minimum And 0.6250 Inches Maximum
- First End Style [AAGZ]
- Plain
- Material [MATT]
- Copper Alloy
- Largest Step Diameter [CSPY]
- 1.000 Inches Nominal
- Second End Distance From End To Groove [AMFQ]
- 0.600 Inches Nominal
- Second End Distance From Keyway Center To End [AMFW]
- 1.365 Inches Nominal
- Second End External Keyway Length [AMFS]
- 1.031 Inches Nominal
- Second End External Thread Length [AMHA]
- 0.600 Inches Nominal
- Second End Diameter [AMFZ]
- 0.7500 Inches Minimum And 0.7510 Inches Maximum
- Second End Style [AAHP]
- Circular Grooved Woodruff Keyway And Externally Threaded
- Second End Groove Diameter [AAHX]
- 0.6000 Inches Nominal
- Second End Groove Width [AAHW]
- 0.1880 Inches Nominal
- Second End Keyway Width [AMFR]
- 0.1880 Inches Minimum And 0.1900 Inches Maximum
- Overall Length [ABHP]
- 42.188 Inches Nominal
- Step Quantity [ATPC]
- 6
DLA Procurement Analysis 3040-01-313-8754
Management Data 3040-01-313-8754
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3040-01-313-8754
Freight Information 3040-01-313-8754
3040-01-313-8754 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-313-8754 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-313-8754 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-313-8754 is not classified as a special type of cargo when transported by water. 3040-01-313-8754 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-01-313-8754 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: