Premium Information is available for this item - Upgrade for $1 a day
3040-01-313-0707
Shouldered Shaft
3040013130707 013130707 9380308
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
November 2023
1
Marketplace 3040-01-313-0707
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-313-0707 1+ Documents (More...)
SHAFT,SHOULDERED 100 EA NS Request Quotation Subscribe to View Vendor Details... 9380308 SHAFT
3040-01-313-0707 RQST NE Updated Every Day 3040-01-313-0707 RQST Updated Every Day 3040-01-313-0707
Restrictions 3040-01-313-0707
3040-01-313-0707 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-313-0707
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-313-0707
- US Army (A920)
- Effective Date:
- 1 Aug 2006
- Former MOE Rule:
- A181
- Supplementary Receivers:
- AZCNBF
Approved Sources 3040-01-313-0707
- Part Number
- Manufacturer
- Status
- 9380308
- Manufacturer
- 19200 - Combat Capabilities Development (Active)
- Primary Buy
- Primary Buy
Datasheet 3040-01-313-0707
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Item Identification [AGAV]
- Used On M2a1/M3a1
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.4975 Inches Nominal
- First End Step Length [CSQZ]
- 1.810 Inches Nominal
- First End Style [AAGZ]
- Square (Round Corners)
- First End Width Across Flats [ACKY]
- 0.302 Inches Nominal
- Material [MATT]
- Steel Comp 4130 Or Steel Comp 8630
- Largest Step Diameter [CSPY]
- 1.000 Inches Nominal
- Material Document And Classification [MDCL]
- Astm A322 Assn Std Single Material Response Or Astm A331 Assn Std Single Material Response
- Second End Diameter [AMFZ]
- 0.5000 Inches Nominal
- Second End Step Length [CTBM]
- 1.810 Inches Nominal
- Second End Style [AAHP]
- Hexagonal
- Second End Width Across Flats [ACMD]
- 0.396 Inches Nominal
- Overall Length [ABHP]
- 4.060 Inches Nominal
- Special Features [FEAT]
- Second End Is Threaded As Follows: .500-13 Unc-2A. Cadmium Plate,Type 2,Cl 3,Spec Qq-P-416. Quench And Temper To Rockwell C28 Thru C33
- Step Quantity [ATPC]
- 2
Weapon Systems (WSDC) 3040-01-313-0707
DLA Procurement Analysis 3040-01-313-0707
- Last Stock Position:
- 66 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3040-01-313-0707
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Similar Supply Items to 3040-01-313-0707
Freight Information 3040-01-313-0707
3040-01-313-0707 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-313-0707 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-313-0707 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-313-0707 is not classified as a special type of cargo when transported by water. 3040-01-313-0707 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-313-0707
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- No Requirement
- Not Applicable
- Vendor's Setup or Folding Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Procurement History 3040-01-313-0707 1 Records
Contracting Technical Data File (CTDF) 3040-01-313-0707 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: