Premium Information is available for this item - Upgrade for $1 a day
3040-01-307-7216
Shouldered Shaft
3040013077216 013077216 501-6160771 DETAIL 6-5B 501-6160771 ITEM 18 2680-1341 ITEM 18 501-6160771
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
3
Marketplace 3040-01-307-7216
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-307-7216 5+ Documents (More...)
/fsg-30/fsc-3040/us 3040-01-307-7216 Shouldered Shaft 3040013077216013077216 501-6160771 DETAIL 6-5B501
A shaft having two or more different diameters ASSY 97 501-6160771 DETAIL 6-7A 501-6160771 501-6160771
DETAIL 6- 7A 501-6160771 ITEM 20 Vehicular Universal Joint Yoke 2520013080573 DETAIL 6-8C 501-6160771
/www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-307-7216 Shouldered Shaft 3040013077216 013077216 for
www.nsnlookup.com /fsg-48/fsc-4820/us 4820-01-391-9803 Valve Gear Operator 4820013919803013919803 501-6160771
Shouldered Shaft 3040013077216 013077216 2680-1341 501-6160771 Managed by United States https//
/fsg-31/fsc-3120/us
-01-307-7290 Manual Control Lever 3040013077290 https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-307-7216
Shouldered Shaft 3040013077216 013077216 Gear Operator4820013919803 013919803 501-6160771 https
ITEM 20 2680-1341 ITEM 20 501-6160771 A rigid item of various shapes and cross-sections ITEM 19 2680
501 Joint Yoke 2520013080573 DETAIL 6-8C 501-6160771 ITEM 19 2680-1341 ITEM 19 501-6160771 A
Restrictions 3040-01-307-7216
3040-01-307-7216 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-307-7216
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-307-7216
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
Approved Sources 3040-01-307-7216
- Part Number
- Manufacturer
- Status
- 501-6160771 DETAIL 6-5B
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Primary Buy
- Primary Buy
- 501-6160771 ITEM 18
- 53711 - Naval Sea Systems Command (Active)
- Secondary Buy
- Secondary Buy
- 2680-1341 ITEM 18
- 43689 - Huntington Ingalls Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 501-6160771
- 53711 - Naval Sea Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-307-7216
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Steel Comp 4340
- Surface Finish [CSYM]
- 125.0 Microinches
- First End Style [AAGZ]
- Flat Keyway
- First End Keyway Width [AMCZ]
- 0.2510 Inches Nominal
- First End External Keyway Length [AMDE]
- 1.000 Inches Nominal
- First End Keyway Depth [AMDG]
- 0.147 Inches Nominal
- First End Diameter [AMDL]
- 0.9975 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- External Threaded
- Second End Diameter [AMFZ]
- 0.7500 Inches Nominal
- Second End External Thread Length [AMHA]
- 1.125 Inches Nominal
- Largest Step Diameter [CSPY]
- 2.000 Inches Nominal
- Overall Length [ABHP]
- 9.750 Inches Nominal
- Step Quantity [ATPC]
- 5
Weapon Systems (WSDC) 3040-01-307-7216
DLA Procurement Analysis 3040-01-307-7216
Management Data 3040-01-307-7216
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-307-7216
Freight Information 3040-01-307-7216
3040-01-307-7216 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-307-7216 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-307-7216 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-307-7216 is not classified as a special type of cargo when transported by water. 3040-01-307-7216 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-307-7216
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension over 2", but less than 24"
- Above 110G
- MIL-PRF-16173, Cosmoline, Grade 2, Soft Film
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 9.8" H x -- W x -- L
- --
- --
- Preservative Coating Only
- Any Suitable Process
- 9.8" H x -- W x -- L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- MIL-PRF-16173, Grade 2, Corrosion Preventive, Solvent Cutback, Cold Application, Soft Film
- MIL-PRF-121, Type II, Light Duty, Greaseproof, Waterproof Barrier
- No Requirement
- Not Applicable
- ASTM-D5118, Type CF, Class Weather-Resistant, Corrugated Fiberboard Box
- No special marking
- MIL-PRF-121, Type II, Light Duty, Greaseproof, Waterproof Barrier
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 3040-01-307-7216 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: