Premium Information is available for this item - Upgrade for $1 a day
3040-01-307-6341
Shouldered Shaft
3040013076341 013076341 2492756 PIECE 206 DE1052-2042-8-206
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
5
Marketplace 3040-01-307-6341
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-307-6341 1+ Documents (More...)
(Identification) 1/2 NSN 3040-01-307-6341 (Identification) 2/2 - - 1.
RQST NE Updated Every Day 3040-01-307-6341 RQST Updated Every Day 3040-01-307-6341 RQST NE Related Documents
Restrictions 3040-01-307-6341
3040-01-307-6341 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-307-6341
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-307-6341
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
- Spain (YB01)
- Effective Date:
- 1 May 1997
- Turkey (ZW01)
- Effective Date:
- 1 Nov 1998
Approved Sources 3040-01-307-6341
- Part Number
- Manufacturer
- Status
- 2492756 PIECE 206
- Manufacturer
- 81994 - Philadelphia Naval Shipyard (Active)
- Primary Buy
- Primary Buy
- DE1052-2042-8-206
- 70876 - Bath Iron Works Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 2492756 PIECE 206
- 70876 - Bath Iron Works Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3040-01-307-6341
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Item Identification [AGAV]
- Shutter Auto Frd Fan
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.9350 Inches Minimum And 0.9410 Inches Maximum
- First End Style [AAGZ]
- Plain
- Largest Step Diameter [CSPY]
- 1.500 Inches Nominal
- Second End Step Length [CTBM]
- 0.6250 Inches Nominal
- Second End Style [AAHP]
- Square (Round Corners)
- Second End Width Across Flats [ACMD]
- 0.4380 Inches Nominal
- Step Quantity [ATPC]
- 9
- Surface Finish [CSYM]
- 32.0 Microinches
Weapon Systems (WSDC) 3040-01-307-6341
DLA Procurement Analysis 3040-01-307-6341
- Last Stock Position:
- 8 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3040-01-307-6341
Navy
- Cognizance:
- 3B
Similar Supply Items to 3040-01-307-6341
Freight Information 3040-01-307-6341
3040-01-307-6341 has freight characteristics managed by the Food and Drug Administration (FDA).It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-307-6341 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-307-6341 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-307-6341 is not classified as a special type of cargo when transported by water. 3040-01-307-6341 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-307-6341
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Non-Metallic Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 44.0" H x 22.0" W x 4.0" L
- --
- --
- Preservative Coating Only
- Any Suitable Process
- 44.0" H x 22.0" W x 4.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- Vendor's Protective Grease or Oil Coating
- MIL-PRF-121, Greaseproof, Waterproof Barrier
- No Requirement
- Not Applicable
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- MIL-PRF-121, Greaseproof, Waterproof Barrier
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Procurement History 3040-01-307-6341 2 Records
Contracting Technical Data File (CTDF) 3040-01-307-6341 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: